CORRUSEC D10 (SR4) RATED FENCING
CORRUSEC D10 (SR4) RATED FENCING
CorruSec D10 (SR4) fencing is a patent-pending innovative high-security fencing system designed and developed by Zaun. Independently tested by BRE and entered into the RED BOOK, CorruSec D10 SR4 Fencing successfully passed and achieved the security rating LPS1175 SR4 under issue 7 and D10 under issue 8.
A unique construction specifically designed to provide a minimum delay time of at least 10 minutes when independently tested following the BRE SR4 testing protocol. The specially configured mesh system has been independently tested to defeat various attack methods, including hand and power tools.
Ideal for protecting assets, including water utility sites, oil and gas compounds, data centres, and other critical, national importance (CNI). The robust fencing solution also provides good visibility for use with CCTV camera systems.
CorruSec D10 (SR4) is configured using HiSec Super 10 to the front and rear panels and a corrugated HiSec 3/5/10 mesh panel in the centre. Each flat panel features a 76.2mm x 12.7mm mesh configuration with 4mm horizontal and 10mm vertical wires.
INFORMATION
BRAND
Zaun
PRODUCT TYPE
Fencing
TESTED
Independently tested with a minimum delay time of at least 10 minutes
WIRE DIAMETER
10mm Verticals x 4mm Horizontals (Attack Face) & 3mm verticals x 3mm horizontals (Corrugated) & Either 10mm Verticals x 4mm Horizonals (Non-Buried) OR 4mm Verticals x 4mm Horizontals (Buried) (Inner Layer)
TOP EDGE PROJECTION
Minimal (Optional Extra)
MANUFACTURED
Manufactured to BS1722 Part 14
FIXINGS
- Through Bolts
- Washers & Nuts and Anti Tamper Security Fixings
FEATURES
- Patent Pending
- Available in ground or base plated
- LPCB LPS1175 Security Rating 4 (D10)
- It can be used with your choice of security toppings
- Ideal for use on sites of Critical National Importance
- Designed to defeat a range of hand and power tools
- The unique configuration of welded mesh panels
DETAIL
POSTS & FIXINGS
The CorruSec perimeter security fencing system features a post and clamp bar configuration, providing a simple and easy installation method. Supplied with through bolts, washers and nuts and installed using either power or hand tools.
SLOPING GROUND
Panels can be stepped as required on the post. However, on steeper gradients, it is recommended that taller panels are either part-buried or additional posts are used.
VARIATIONS
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available: Buried, Wall fixing, cranked posts or base plated, Cranked, V Shape or Top Hat extensions for barbed or razor wire, Extended posts for CCTV, electric fencing, lighting or physical security devices.
FINISH
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing.


