KILZ® ORIGINAL OIL-BASED INTERIOR PRIMER
KILZ® ORIGINAL OIL-BASED INTERIOR PRIMER
KILZ® ORIGINAL Oil-Based Primer is a powerful stainblocking formula that blocks most heavy interior stains including water, smoke, tannin, ink, pencil, felt marker, grease, and also seals pet, food and smoke odors.
Trusted by pros for over 40 years, excellent sealing and adhesion properties help paint adhere to most interior surfaces leading to better results.
Use on wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces†. Not recommended for mold or mildew-prone surfaces or on flooring.
INFORMATION
DRY TIME @ 77°F (25°C) / 50% RH
- Paint in 1 hour.
- Dries to the touch in 30 minutes.
BRAND
Kilz
PRODUCT TYPE
Primer
COVERAGE
300-400 Sq.Ft./Gal
BASE
Oil
INT/EXT
Int
COLOR
White
COVERAGE - LOW
300 sq ft/ gal
COVERAGE HIGH
400 sq ft/ gal
MILS DRY 2
1.7
MILS WET 1
4
FINISH @ 85°
< 10
APPLICATION TEMP
- Min Application Temp : 50°F (10°C)
- Max Application Temp : 90°F (32°C)
BEST FOR USE ON
Interior surfaces. Best for woodwork, metal, doors and windows. Ideal for severe or heavy stain blocking, odor blocking, to enhance adhesion between the surface and topcoat especially for wood. Apply to wood, drywall, plaster, hardboard, MDF, composite wood, brick, masonry, concrete, cinder block, fiber cement, galvanized and non-ferrous metals, chalky and glossy surfaces.
VISCOSITY
80 - 90 KU
DRY TO TOUCH
30 min
ROLLER
- Roller - Smooth : 3/8" - 1/2" nap
- Roller - Porous : 1/2" - 3/4" nap
DRY TO RECOAT
1 hour
MAX TINT
2 oz
KEY FEATURES
Oil-Based. Heavy and severe stain blocker, Excellent adhesion, Smooth application experience, Fast drying, Sands easily, Odor blocking, High hiding, Seals porous surfaces.
FEATURES
- Trusted by pros for over 40 years, excellent sealing and adhesion properties help paint adhere to most interior surfaces leading to better results.
- Use on wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces†. Not recommended for mold or mildew-prone surfaces or on flooring.
SPRAY
- Spray Tip : .015" - .019"
- Spray Filter : 60 mesh
- Spray Pressure : 2,500 - 3,000
VOC
443 g/L
BRUSH
Nylon / Poly
DOWNLOADS
↓ SDS 1000
↓ Technical Data Sheet
DETAIL
CLEAN UP & DISPOSAL
- Do not dispose of this product down a drain. Please consider donating any unused product.
- Clean equipment and paint spatters with mineral spirits or acetone. Immediately after use, dispose of soiled rags and waste in a closed, water-filled container.
- If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service
SURFACE PREPARATION†
The following steps are recommended for product performance.
- All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
- If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
- †Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.*
- Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.*
- Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.
- Fire Restoration: It is critical to clean smoke damaged surfaces thoroughly before priming.
- Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL Primer may be used on clean, dry, aged masonry surfaces that have cured (dried) at least 90 days. If masonry has cured less than 90 days, use KILZ 3® PREMIUM, KILZ 2® or KILZ ORIGINAL LOW ODOR® Primers.
APPLICATION
- Apply using a brush, roller or sprayer.
- Brush – High quality Nylon/Polyester
- Airless spray – .015-.019 tip / 60 mesh filter
- Eye protection is recommended. Do not thin. Stir thoroughly before and occasionally during use.
- Use product when painting surface and air temperatures are between 35°F (2°C) and 90°F (32°C).
- Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.
- Coverage : 300-400 sq. ft. (28-37 m2) per gallon depending on application method and surface porosity.
- Stainblocking : After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
- Prime entire surface to ensure a uniform appearance of the topcoat.
- Tinting : Up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than topcoat is recommended.
WARRANTY - LIMITED WARRANTY
For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable.
This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.


