Zaun Ltd

Zaun CorruSec D10 (SR4) Rated Fencing

CORRUSEC D10 (SR4) RATED FENCING

Zaun CorruSec D10 (SR4) Rated Fencing

CORRUSEC D10 (SR4) RATED FENCING 

Corrusec d10 (sr4) fencing is a patent-pending innovative high-security fencing system designed and developed by zaun.

Independently tested by bre and entered into the red book, corrusec d10 sr4 fencing successfully passed and achieved the security rating lps1175 sr4 under issue 7 and d10 under issue 8.

Zaun CorruSec D10 (SR4) Rated Fencing
Zaun CorruSec D10 (SR4) Rated Fencing

A unique construction specifically designed to provide a minimum delay time of at least 10 minutes when independently tested following the bre sr4 testing protocol.

The specially configured mesh system has been independently tested to defeat various attack methods, including hand and power tools. Ideal for protecting assets, including water utility sites, oil and gas compounds, data centres, and other critical, national importance (cni). The robust fencing solution also provides good visibility for use with cctv camera systems.

Zaun CorruSec D10 (SR4) Rated Fencing

INFORMATION

Zaun CorruSec D10 (SR4) Rated Fencing

BRAND

Zaun

PRODUCT TYPE

Fencing

APPLICATIONS

- Utilities
- High Security

COLLECTION 

CorruSec

LAYER 

Zinc & Paint

FIXINGS 

Through Bolts, Washers & Nuts and Anti Tamper Security Fixings

Zaun CorruSec D10 (SR4) Rated Fencing

TOP EDGE PROJECTION 

Minimal (Optional Extra)

HEIGHT 

2.80 metre +

PANEL WIDTH

2515mm

HORIZONTAL WIRE 

4mm

VERTICAL WIRE

10mm

Zaun CorruSec D10 (SR4) Rated Fencing

WIRE DIAMETER 

10mm Verticals x 4mm Horizontals (Attack Face) & 3mm verticals x 3mm horizontals (Corrugated) & Either 10mm Verticals x 4mm Horizonals (Non-Buried) OR 4mm Verticals x 4mm Horizontals (Buried) (Inner Layer)

MESH SIZE 

76.2 x 12.7mm

POST SIZE 

80 x 80mm

POST CENTRES 

2540mm

CLAMP BAR SIZE 

80 x 5mm

Zaun CorruSec D10 (SR4) Rated Fencing

FEATURES 

- Patent pending
- Manufactured to bs1722 part 14
- Lpcb lps1175 security rating 4 (d10)
- Available in ground or base plated
- The unique configuration of welded mesh panels
- Ideal for use on sites of critical national importance
- Designed to defeat a range of hand and power tools
- It can be used with your choice of security toppings
- Independently tested with a minimum delay time of at least 10 minutes

FIXING CENTRES 

228.6mm Max.

PRODUCTION

Made in Britain

COATING 

Marine Coatings

PANEL DIMENSIONS AND INSTALLATION

At a minimum height of 2.8 metres high, corrusec d10 (sr4) features a maximum corrugated infill of 2.4 metres high. Supplied with widths of 2.5 metres with 2540mm post centres with a double row of fixings. Posts designed using 80x80mm shs and available in either bolt down or in-ground post options. Full panel assembly fixed to the posts using 80mm full height clamp bars with fixing centres of 9 inches (228.6mm).

Zaun CorruSec D10 (SR4) Rated Fencing

MULTI-LAYER PANEL CONSTRUCTION AND MESH

Corrusec d10 (sr4) is configured using hisec super 10 to the front and rear panels and a corrugated hisec 3/5/10 mesh panel in the centre. Each flat panel features a 76.2mm x 12.7mm mesh configuration with 4mm horizontal and 10mm vertical wires.

In addition, a buried version of corrusec d10 (sr4) is available, where the rear hisec super 10 panel is replaced with standard hisec 358. Whichever configuration is used, care must be taken with weed suppression to ensure weeds cannot grow inside the fence. This would apply to any multi-layer fence from any supplier. The corrugated section was pressed to approximately 80mm in depth. All three layers are bolted together using bolts fixed into a grid pattern throughout the combined fence panel.

CERTIFICATES

ALL CERTIFICATES

Zaun CorruSec D10 (SR4) Rated Fencing
Zaun CorruSec D10 (SR4) Rated Fencing
Zaun CorruSec D10 (SR4) Rated Fencing
Zaun CorruSec D10 (SR4) Rated Fencing

DETAIL

POSTS & FIXINGS 

The corrusec perimeter security fencing system features a post and clamp bar configuration, providing a simple and easy installation method. Supplied with through bolts, washers and nuts and installed using either power or hand tools.

Zaun CorruSec D10 (SR4) Rated Fencing
Zaun CorruSec D10 (SR4) Rated Fencing

SLOPING GROUND 

Panels can be stepped as required on the post. However, on steeper gradients, it is recommended that taller panels are either part-buried or additional posts are used.

VARIATIONS 

Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available: buried, wall fixing, cranked posts or base plated, cranked, v shape or top hat extensions for barbed or razor wire, extended posts for cctv, electric fencing, lighting or physical security devices.

Zaun CorruSec D10 (SR4) Rated Fencing

FINISH

All zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) Benefit from a protective zinc layer and electrostatically applied polyester powder coating to bs1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers.

Zaun CorruSec D10 (SR4) Rated Fencing

In a UK c1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life. 

Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.

T +44 1902 796699
Zaun Ltd