Mayr-Melnhof Holz Holding AG

Mm-holz Timber Concrete Composite Element

TIMBER CONCRETE COMPOSITE ELEMENT

Mm-holz Timber Concrete Composite Element

TIMBER CONCRETE COMPOSITE ELEMENT

XC® marks a smart, ecological combination between wood and concrete for high-quality floors in residential and office buildings.

XC® components are pre-fabricated, large-format and standardised panel-shaped timber concrete composite elements for structural civil engineering purposes. For instance, this hybrid is used for high-quality floors and partition ceilings in multi-storey residential and office buildings.

Mm-holz Timber Concrete Composite Element
Mm-holz Timber Concrete Composite Element

XC® combines the properties of both perfectly: Cross-laminated timber – which is also available in visible quality – takes care of the tensile forces that occur in the structure's lower cross-section, while the concrete absorbs the compressive forces in the upper.

As a building element, the XC® by MMK timber concrete composite element bridges large spans with an improved vibration behaviour and good sound insulation values.

Mm-holz Timber Concrete Composite Element
Mm-holz Timber Concrete Composite Element

Its high degree of industrial prefabrication and flexible dimensions allow for fast and dust-free installation at the construction site.

INFORMATION

BRAND

Mm-holz

PRODUCT TYPE

Timber Concrete

WOOD SPECIES

Spruce (Picea Abies)

MOISTURE CONTENT

12% (± 2%)

QUALITY

- Non-Visible
- Residential Visible
- Industrial Visible Quality

USAGE CLASS

NKL 1+2

STRENGTH GRADE

C24

Mm-holz Timber Concrete Composite Element
Mm-holz Timber Concrete Composite Element

INNOVATIVE TIMBER-CONCRETE COMPOSITES

Xc® by mmk timber concrete composite elements were developed by mayr-melnhof holz in cooperation with kirchdorfer fertigteilholding and are produced by their joint venture mmk holz-beton-fertigteile gmbh.

PRODUCT STANDARD

ETA -09/0036

SURFACE AREA

Min. 5 m2 surface area

DIMENSIONS

- Width  : 3 m (MUF)
- L
ength : up to 10.2 m

Mm-holz Timber Concrete Composite Element

WEIGHT

Approx. 480 kg/m³ (to determine transport weight)

Mm-holz Timber Concrete Composite Element

SURFACE

Sanded

FIRE CLASS

D-s2, d0

Mm-holz Timber Concrete Composite Element

SURFACE

Sanded

FIRE CLASS

D-s2, d0

THICKNESS

- 100 mm cross-laminated timber (at 80 mm of concrete)
- 200 mm cross-laminated timber (at 340 mm of concrete)

FLEXIBLE

Innovative, flexible and optimally combined.

ENVIRONMENT

Indoor  & Outdoor

GLUING

MUF EN 301-I-90-GP-0,3 S

DETAIL

XC® – XLAM CONCRETE: BENEFITS

- Predefined standards
- Standardised tender documents
- Advantages in the construction process
- Ready to install and free of underpinning

- Outstanding structural-physical properties
- Fire protection verification via dimensioning
- No fasteners in the element as standard and therefore recyclable by type

- Large spans possible for simple floor plan layout
- No additional introduction of building moisture during the construction process
- Natural wood appearance is retained due to tested sound insulation superstructures
- High sound insulation and very good vibration behaviour (ceiling class 1 according to Eurocode)

MMK: LOGISTICS SERVICES FOR XC® – XLAM CONCRETE

TRUCK DELIVERY TO CONSTRUCTION SITES

- Long-standing stable business relationships with a large number of logistics service providers
- We use digital platforms for fast communication with our transport service providers.
Just-in-time delivery

A FULL RANGE OF MODERN TRANSPORT SOLUTIONS IS OFFERED AS NECESSARY:

- All-wheel drive trucks
- Loads up to 52 m length
- Hydraulically steered trailers
- Trailers with on-board forklifts
- Covered loads up to 3,5 m wide
- Narrow-access self-steering trailers
- Edscha sliding roof trailers for vertical access
- Solo vehicles with up to 10 m loading length for inner-city areas

DOCUMENTS & FORMALITIES

Together with our logistics partners we will provide you with professional documentation to enable you to cover all your export. import, and customs formalities without problems.

XC® – XLAM CONCRETE: AREAS OF APPLICATION

TYPES OF BUILDINGS

- Multi-storey residential buildings
- Commercial and office buildings
- Single and multiple family homes
- Tourism buildings such as hotels and restaurants
- Community buildings such as kindergartens, schools and nursing homes

BUILDING COMPONENT

- XC® living flat ceilings
- XC® office beam ceilings
- XC® living plus flat ceilings with edge beams for linear and rest supports
- XC® living plus flat ceilings with edge beams for linear and rest supports and integrated balcony

Pre-fabricated XC® components are particularly suited for renovation, expansion, urban densification and redensification due to their low weight compared to other building materials.

T +43 3842 300 F +43 3842 300-24891
Mayr-Melnhof Holz Holding AG