behr ETX® SingleShot™ Wall Texture
ETX® SINGLESHOT™ WALL TEXTURE
ETX® SINGLESHOT™ WALL TEXTURE
Etx® singleshot™ plus wall and ceiling texture is the perfect solution for drywall patches that require texture.
Equipped with an angled nozzle for ceilings and hard-to-reach areas, the aerosol spray can system provides ultimate control over a variety of texture patterns from a fine Orange Peel to a heavy Knockdown.
Discover the power of SingleShot Wall and Ceiling Texture and unlock professional-grade results with effortless cleanup for all your drywall repair projects!
information
BRAND
Behr
PRODUCT TYPE
Drywall Patches
FEATURES
- Adjustable nozzle
- Water based, low odor formula
- Assortment of texture patterns
BEST FOR USE IN
Ideal for use on properly prepared surfaces such as: Drywall
ENVIRONMENT
Indoor
PRODUCTION
Made in USA
COVERAGE
Average 12 oz can covers up to 60 sq ft
FINISH
An assortment of texture patterns from a fine Orange Peel to a heavy Knockdown
COLLECTION
ETX
AREA
Hard to Reach
SURFACE PREPARATION
The surface must be clean and dry before spraying ETX® SingleShot™ Wall Texture.
FORMULA
Water Based
DOWNLOAD
↓ Etx Singleshot Wall Texture
WARRENTY
Behr process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. This warranty is not valid when the product is not properly applied to a properly prepared surface or cared for in accordance with the label directions.
This warranty excludes water intrusion due to structural defects and/or caulk and sealant failure. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, behr process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you.
This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
HOW TO USE
DRY TIME
Drying times will differ, depending on the surface, heaviness of texture, humidity, etc. Paint when completely dry with your choice of paint. For better results, prime area before painting.
TO USE
-The adjustable nozzle allows for infinite adjustability. -Always keep nozzle pointed away from face. The use of personal protective equipment is required.
-Shake can vigorously for 10–15 seconds. This product works best when contents are between 75°F and 90°F.-Holding the can upright approximately 16–22 inches from the wall/ceiling, depress the nozzle to begin spraying. Test ETX® SingleShot™ Wall Texture in an inconspicuous spot to achieve the desired pattern. If the flow decreases, shake the can vigorously. Spray using a circular motion to disperse evenly. Overlap the spray onto the existing texture to help blend in. A second coat may be applied for a heavier texture.
TO CLEAN
-Do not stick pins or wire into spray nozzle opening. -Do not burn or place in home trash compactor. -Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service. -Clear spray valve immediately after use by turning can upside down and spraying until only clear gas is released. If spray nozzle becomes clogged, remove and clean with water.
