Kilz Kilz® Pva Drywall Professional Interior Primer
KILZ® PVA DRYWALL PROFESSIONAL INTERIOR PRIMER
KILZ® PVA DRYWALL PROFESSIONAL INTERIOR PRIMER
Kilz pva drywall primer is designed for use on new drywall.
It is a fast-drying, interior water-based primer formulated to prime and seal new, uncoated drywall and reduce the number of topcoats required to achieve a uniform, professional quality finish.
INFORMATION
BRAND
Kilz
PRODUCT TYPE
Primer
ROLLER
- Smooth : 3/8" - 1/2" nap
- Porous : 1/2" - 3/4" nap
KEY FEATURES
For use on new uncoated drywall. Seals porous drywall to achieve a uniform, professional quality finish in less coats. Fast drying, Low VOC, ready to spray, brush or roll. Easy soap and water clean-up. Greenguard Gold Certified.
SPRAY FILTER
60 mesh
VOLUME SOLIDS
26% (+/-) 2%
BASE
Water
INT/EXT
Interior
DRY
- Touch : 30 min
- Recoat : 2 hour
APPLICATION TEMP
- Min : 50°F (10°C)
- Max : 90°F (32°C)
COVERAGE
- Low : 300 sq ft/ gal
- High : 400 sq ft/ gal
MILS WET (HIGH)
4.0
MILS DRY (HIGH)
1.0
MILS WET (LOW)
6.4
MILS DRY (LOW)
1.6
WEIGHT SOLIDS
42% (+/-) 2%
CLEAN-UP & DISPOSAL
-Use soap and water to clean hands, tools, and spills. -For recycling or disposal of empty containers and unused product, contact your household refuse collection service.
COLOR
White
VISCOSITY
105 - 115 KU
DRY TIME AT 77°F (25°C), 50% RH
-Dries to the touch in 30 minutes. -Paint or topcoat after 2 hours. -Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.
BRUSH
Nylon / Polyester Blend
FINISH @ 85°
< 10
SPRAY TIP
.015" - .021"
COVERAGE
300 to 400 sq ft/gal
SPRAY PRESSURE
2.500 - 3.000
MAX TINT
2 oz
VOC
<50 g/L
DOWNLOADS
↓ SDS PX010
↓ Technical Data Sheet
USE
Designed for use under flat and low sheen paints only. Do not topcoat with glossy paint finishes.
FEATURE
Seals Porous Surface
DETAIL
SURFACE PREPARATION
The following steps are recommended for product performance.
- Cover all nail and screw heads with joint compound according to directions and sand to smooth surface.*
- Tape drywall and apply joint compound. Allow to fully cure according to directions prior to priming.
- Sand to smooth surface before priming.* Wipe off dust with a damp cloth. Allow to dry thoroughly.
APPLICATION
- Eye protection is recommended.
- Use only when temperatures are between 50°F (10°C) and 90°F (32°C).
- Coverage is approximately 300-400 square feet per gallon depending on surface porosity.
- For airless spray applications, tip size should be .017"-.021" tip/60 mesh filter.
- May be tinted with up to 2 ounces of universal colorant per gallon.
- Glossy surfaces: not recommended. Please use kilz® premium or kilz 2® primers.
- Masonry, brick, stucco and plaster: not recommended. Please use kilz® premium or kilz 2® primers.
- Stainblocking: not formulated to block stains - for stainblocking, use oil based primers like kilz® original and water based primers like kilz 2® or kilz® premium.
LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable.
This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
