Kilz Kilz® Chalk Style Paint Interior
KILZ® CHALK STYLE PAINT INTERIOR
KILZ® CHALK STYLE PAINT INTERIOR
Easily add history and character to any surface with kilz® chalk style paint. It goes on thick, for excellent hide, and requires very little surface preparation.
Depending on the vision you have for the project, simply apply 1 or 2 coats on a clean, dust-free, or lightly sanded surface. To enhance durability, seal the surface afterward with kilz clear sealing wax.
INFORMATION
BRAND
Kilz
PRODUCT TYPE
Paint Interior
COVERAGE
60-100 Sq.Ft./Gal
ROLLER - SMOOTH
3/8" - 1/2" nap
DRY TIME @ 77°F (25°C) / 50% RH
- Recoat in 2 hours
- Dries to the touch in 1 hour.
- Application at lower temperatures, in high humidity, or in poorly ventilated areas will affect dry time.
FINISH
Chalk
COLLECTION
Kilz®
VOC
<50g/L
FINISH @ 85°
<5
AT 60 SQ. FT. PER QUART (DRY)
2.5 Mils
% SOLIDS BY WEIGHT
59%
% SOLIDS BY VOLUME
38%
BRUSH
Nylon / Polyester Blend
AT 60 SQ. FT. PER QUART (WET)
6.5 Mils
BEST FOR USE ON
kilz chalk style paint can be applied over most existing finishes with little surface preparation. use to “up-cycle” vintage furniture. apply to old or new wood, cast stone, concrete, or even metal surfaces†. do not use on horizontal surfaces subject to foot traffic.
VISCOSITY
85 - 95 KU
WEIGHT / GALLON (LBS)
12.5
FLASHPOINT
No
AT 100 SQ. FT. PER QUART
- Wet : 4 Mils
- Dry : 1.5 Mils
DETAIL
To enhance durability, seal the surface afterward with kilz clear sealing wax. An “Antique” look can be achieved by applying two contrasting colors, distressed with sandpaper, and sealed with kilz dark sealing wax.
THICK
Thick excellent coverage
SURFACE
Minimal surface preparation required
DETAIL
CLEAN UP & DISPOSAL
- Clean all tools and equipment with clean water.
- For disposal of empty containers and unused product, contact your household refuse collection service.
- To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.
APPLICATION
- Use on properly prepared surfaces.
- Up to 100 sq. ft. of coverage per quart with two coats.
- Shake the container thoroughly before opening for application.
- For application, use a Nylon/Polyester brush or a high density foam roller.
- Log on to kilz.Com for project inspiration and “How TOS” step by step instruction
- If you find this product to be too thick, add up to 2 oz. of water per quart to thin it to the desired thickness for smooth and easy application.
- Use product when the surface and air temperatures are between 50-90°F and will remain in that range for at least 4 hours after applying.
PRODUCT USAGE - SURFACE PREPARATION
The following steps are recommended for product performance.
- Remove all dust with a damp cloth and allow to dry.
- We recommend lightly sanding glossy surfaces and repairing any imperfections*.
- Before applying KILZ CHALK STYLE PAINT, clean the surface to make sure it is free of loose or peeling paint, mold and mildew stains, rust and all other dirt and debris.
- †For optimal adhesion to difficult surfaces, use KILZ PREMIUM Primer.
- Use kilz chalk style paint on properly prepared uncoated or painted interior surfaces.
- Follow the instructions on the back of the primer label and top coat it with KILZ CHALK STYLE PAINT
- For wood that contains tannins, such as Redwood and Cedar, a coat of primer such as KILZ PREMIUM Interior/Exterior water-based primer is recommended.
