Kilz Kilz® Original Interior & Exterior Primer
KILZ® ORIGINAL INTERIOR & EXTERIOR PRIMER
KILZ® ORIGINAL INTERIOR & EXTERIOR PRIMER
Kilz® original has been a trusted brand for over 50 years! This interior and exterior primer is specially formulated to be a sound undercoat for paint and will help enhance the topcoat’s performance. It has excellent adhesion to both interior and exterior surfaces including masonry, metal and excellent penetration for bare wood.
Kilz® original interior/exterior is a fast drying oil-based sealer that blocks most severe stains including tannin bleed, graffiti, smoke, fire and water stains as well as sealing pet, smoke and other unwanted odors on the surface prior to painting.
Use on interior and exterior surfaces including wood, drywall, plaster, brick, masonry, stucco, interior siding and paneling, metal and properly prepared glossy surfaces†. Not recommended for floors.
INFORMATION
BRAND
Kilz
COLLECTION
Original
DRY TIME
- 77°f (25°c)/50% rh
- Touch in 30 minutes
- Paint in 1 hour
SPRAY PRESSURE
2,500 - 3,000
COVERAGE
300-400 Sq.Ft./Gal
BASE
Oil
COLOR
White
VOLUME SOLIDS
- 56.5% (+/- 2%) for Low VOC version
- 43.3% (+/-2%) for Regular VOC version
FLASHPOINT
- 74°F (23.3°C) for Low VOC version
- 71°F (21.7°C) for Regular VOC version
WEIGHT SOLIDS
- 75% (+/-2%) for Low VOC version
- 64.5% (+/- 2%) for Regular VOC version
INT/EXT
Int/Ext
COVERAGE - LOW
300 sq ft/ gal
COVERAGE - HIGH
400 sq ft/ gal
LOW VOC | REGULAR VOC
350 g/l | 450 g/l
![Kilz Kilz® Original Interior & Exterior Primer](http://{"type":"application/jidipi-edit","data":"<figure class="jdp-reset jdp-image-figure" data-ce-tag="image-figure"><div class="jdp-mask" data-ce-tag="mask"><a href="https://upload.jidipi.com/posts/d00125163/7-MId.jpg" class="jdp-reset jdp-link" target="_blank"><img src="https://upload.jidipi.com/posts/d00125163/7-MId.jpg" data-image-id="6aa2303746008ac6e129c24e" srcSet="https://upload.jidipi.com/fit-in/420x0/posts/d00125163/7-MId.jpg 420w, https://upload.jidipi.com/fit-in/700x0/posts/d00125163/7-MId.jpg 700w, https://upload.jidipi.com/fit-in/900x0/posts/d00125163/7-MId.jpg 900w" data-image-name="7.JPG" width="1000" height="1000" loading="lazy" class="jdp-image jdp-reset"/></a></div></figure>"})
DRY TO RECOAT - LOW VOC | REGULAR VOC
2 hour | 2-3 hours
MILS WET - LOW VOC | REGULAR VOC
5.3
MIN APPLICATION TEMP
35°F (2°C)
MAX APPLICATION TEMP
90°F (32°C)
MILS DRY - LOW VOC | REGULAR VOC
3.0 | 2.3
VISCOSITY
80 - 90 KU
FINISH @ 85°
< 10
DRY TO TOUCH - LOW VOC | REGULAR VOC
60-90 min | 30 min
MILS WET - LOW VOC | REGULAR VOC
4.0
ROLLER - SMOOTH
3/8" - 1/2" nap
ROLLER - POROUS
1/2" - 3/4" nap
MILS DRY - LOW VOC | REGULAR VOC
2.3 | 1.7
BRUSH
Nylon / Polyester Blend
USE
Hides previous color
KEY FEATURES
Oil-Based. Superior durability and weather resistance with best adhesion performance for interior and exterior. Heavy/Severe stain blocking even for tannin and water from bleeding through the topcoat. Exceptional penetration and adhesion to wood. Fast drying, Sands easily, Light odor blocking, High hiding, Seals porous surfaces.
FEATURES
DETAIL
BEST FOR USE ON
Interior and exterior surfaces. Best for bare wood in exterior setting before painting. Use on bare wood with knots or wood prone to bleeding tannin. Best for multiple exterior surfaces as well as interior. Use on wood, drywall, plaster, hardboard, MDF, brick, concrete, cinder block, masonry, stucco, fiber cement, non-ferrous metal, chalky and properly prepared glossy surfaces.
CLEAN UP & DISPOSAL
- Clean equipment and paint spatters with mineral spirits or acetone. Immediately after use, dispose of soiled rags and waste in a closed, water-filled container
- Do not dispose of this product down a drain. Please consider donating any unused product.
- If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.
APPLICATION
- Brush – High quality Nylon/Polyester
- Apply using a brush, roller or sprayer
- Eye protection is recommended. Do not thin. Stir thoroughly before and occasionally during use
- Use product when painting surface and air temperatures are between 35°F (2°C) and 90°F (32°C)
- Roller – High quality 3/8-1/2” nap on smooth surfaces or 1/2-3/4” nap on semi-rough or porous surfaces
- Airless spray – .015-.021 tip / 60 mesh filter
- Prime entire surface to ensure a uniform appearance of the topcoat
- Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
- Tinting: Up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than topcoat is recommended.
- Coverage: 300-400 sq. ft. (28-37 m2) per gallon depending on application method and surface porosity.
PRODUCT USAGE (SURFACE PREPARATION†)
The following steps are recommended for product performance.
- If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
-All surfaces must be clean, free of dust, chalk, oil, mold and mildew, loose peeling paint, rust and all other foreign substances
- Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.
- Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface
- Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming
- Masonry, Brick, Stucco and Plaster: Kilz original interior/exterior Primer may be used on clean, dry, aged masonry surfaces that have cured (dried) at least 90 days. If masonry has cured less than 90 days, use Kilz 3® premium or kilz 2® Primers
LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable.
This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
