Watcofloors Safety Tape
SAFETY TAPE
SAFETY TAPE
Colored safety tape is a highly visible anti-slip floor tape that is an easy and very effective way to improve the safety within your facility.
This floor marking tape is suitable for concrete, wood, brick, stone or metal and can be applied in both interior and exterior applications.
Our safety tape comes as a 60-foot-long roll, in various widths & colors, and is ready for traffic immediately.
INFORMATION
BRAND
Watco
PRODUCT TYPE
Safety Tape
PRIMER REQUIRED
- Use Safety Tape Primer on dusty
- Porous or gritty surfaces
SURFACE PREPARATION
Wash the area to remove any grease, oil, dirt, or other contaminates, rinse and allow to dry. The Safety Tape can be applied to any smooth surface such as concrete, wood, metal, tile, terrazzo, and painted or varnished surfaces. Use the Safety Tape Primer on dusty concrete, porous, or other weak surfaces to ensure better adhesion.
TYPE
- Standard
- Coarse
SIZE
- 2in x 60ft
- 3in x 60ft
- 4in x 60ft
CURING TIME (HOURS)
Immediately ready for traffic
USAGE INTERIOR/EXTERIOR
Interior or Exterior
AVAILABLE COLOR
11
AVAILABLE SIZE
3
SKU (STANDARD)
- 2in x 60ft : C410749
- 3in x 60ft : C410750
- 4in x 60ft : C410751
SKU (COARSE)
- 2in x 60ft : WUS000034-CO-2I-RE
- 3in x 60ft : WUS000034-CO-3I-RE
- 4in x 60ft : WUS000034-CO-4I-RE
SUITABLE FOR
- Concrete
- Wood
- Brick
- Stone
- Metal
FEATURES AND BENEFITS OF INDUSTRIAL SAFETY TAPE
- Fully cures to a strong bond after 48 hours
- Service temperatures range between -22°F to 160°F, but must be first applied over 50°F
- Excellent resistance to oil
- To protect against wearing and water seepage, use Safety Tape Edge Sealer
- Use the Safety Tape Primer on dusty concrete, porous, or other weak surfaces to ensure better adhesion
- Colored resins bind a tough aluminum oxide grit to a PVC backing
- Ideal for indicating hazardous areas or safe escape routes
- Long lasting and consistent color
- Available in Hazard black & yellow or red & white stripes
- Easy to use self-adhesive backing
ALL COLORS
APPLICATION
Apply only when air and surface temperature are above 50°F. The surface area must be clean and dry at the time of application. On stair trends and landings, apply the Safety Tape at least 3/8 back from the edge to avoid edge curl. When applying a strip of Safety Tape, do not peel off entire backing all at once. Rather, peel back about 2 from the end of the strip to expose the adhesive and position in place.
Press down firmly, then remove the remainder of backing from the Safety Tape while affixing it to the surface. Avoid stretching the tape when placing it into position. The Safety Tape may be peeled back up to reposition it if necessary, but try to avoid repeating this action. Once in place, firmly press down on the Safety Tape by hand or with your foot to secure it.
The Safety Tape is suitable to support light foot traffic immediately, however it requires 24 hours for the adhesive to achieve full cure.
