Vitra Prime Round Riser Rail Kit Shower Headset
PRIME ROUND RISER RAIL KIT SHOWER HEADSET
PRIME ROUND RISER RAIL KIT SHOWER HEADSET
3 Function, 130 mm Handshower, Chrome
INFORMATION
BRAND
Vitra
PRODUCT TYPE
Shower Headset
BODY MATERIAL
Plastic
COATING
Chrome
DIMENSIONS
- Height : 780 mm
- Width : 99 mm
- Depth : 68 mm
PRODUCT CODE
A45927
DYNAMIC PRESSURE (IN FLOW)
- Min. 1 bar
- Max. 3 bar
PRODUCT CODE
870-1761-01
COLLECTION
Prime Round
PRODUCTION
Made in UK
INSTALLATION TYPE
Wall Mounted
USE
Bathroom
FUNCTION
3
NUMBER OF WATER INLETS
Single Inlet
OPERATING PRESSURE
Recommended (1-3)
NUMBER OF HOLES
1
ENVIRONMENT
Indoor
TEMPERATURE
Max. 42° C
COLORS
COLORS
-Chrome -Brushed Nickel -Brushed Brass -Brushed Bronze
DETAIL
USAGE AND MAINTENANCE RECOMMENDATIONS
- The product should not be used other than the functions it has. For example holding on the shower head.
- In case of excessive contamination, don't use spirit of salt and similar acidic liquids, powder cleaners and wire wool and hard cleaning sponge which may damage the coating of the product. Clean the products by only using soft clothing and soapy water and dry afterwards.
- Be careful to clean the filter gasket regularly at the inlet of the hand shower and shower heads. It is enough to clean the residues and similar dirt accumulated on the filter by only flowing water. If there is calcification on the filter gasket, keep the gasket in a warm vinegar water and clean by flowing water.
- The usages causing excessive bending and twisting in the hand spray spirals may damage the product. Don't apply sudden and/or excessive pushing force to the hand spray spirals.
- Liquid soaps, hair and body shampoos and bath foams may damage the surfaces of the products. Because of this the residues on the product after usage should be cleaned and rinsed with clean water.
- No special treatment is required for lime cleaning in the anti- lime cartridge hand showers and shower heads. It is enough to clean the water exit sprinkler in the filter of the hand spray by hands for the hand sprays with lime breaker. The product should be cleaned regularly and lime accumulation should be prevented to prevent the clogging occurring due to calcification in the hand showers and shower heads not having lime breaker or easy cleaning feature in the sprinklers.
THE SCOPE OF THE WARRANTY
- The defects arisen because the product is used on the contrary to the subjects included in the technical catalogue, assembly and users' manual.
- The defects and flaws arisen because of the wrong assembly, maintenance, repair, and dismounting made by unauthorized people.
- The damages occurred due to giving hot water out of the standard to the system, freezing and icing.
- The defects arisen from all kinds of wrong usages by the customer even if not stated here (including the usages other than the function of the product).
- Not presenting the approved warranty certificate indicating the product is in the warranty period or the invoice.
- The surface errors and other damages occurred for that the product is kept in the construction place, during transportation for a long time and the storage conditions are not followed after it is delivered to the customer.
- The deformations which may occur in the products during modifications to be made in the usage area.
- Not following the rules stated in the assembly and users' manual for the cleaning and maintenance works of the products, made by the customer.
- The defects arisen because the original VitrA spare parts are not used and making addition or adaptation to the products without knowledge and approval of VitrA.
- Breakdowns caused by the out-of-standard conditions from the general water network (sand, gravels and particles etc. coming from the installation and damaging the product. Problems caused by piping and installation or damages caused by calcification.
