Virag Contact Vinyl Flooring
CONTACT VINYL FLOORING
CONTACT VINYL FLOORING
Contact Antistatic/Conductive is a vinyl flooring capable of dissipating electrostatic charges, suitable for all spaces where this feature is expressly required such as hospitals and health care facilities.
Its high resistance to wear and humidity make it even more versatile and adaptable to different needs.
INFORMATION
BRAND
Virag
PRODUCT TYPE
Flooring
COLLECTION
Contact
PRODUCTION
Made in Italy
USE
- Sanitary
- Commercial
MATERIAL COMPOSITION
Contact Antistatic/Conductive is composed of a homogeneous mixture of vinyl resins, plasticizers, dyes, mineral fillers and special inorganic additives that make the material conductive or antistatic. Through-thickness marbling throughout, processing done by press without the use of calendering. Suitable for heavy traffic.
DOWNLOADS
↓ Contact - Dop
↓ Contact - Brochure
↓ Contact - Color Card
↓ Contact - Technical Data Sheet
↓ Contact - Maintenance Instructions
USE
Decor
WEIGHT
2.30 kg/m2
SIZE
Tile
THICKNESS
1.7 mm
MATERIAL
Vinyl
ENVIRONMENT
Indoor
WIDTH & LENGTH
60.8 cm
MAINTENANCE
Remove any traces of adhesive with an Evo cleaner. The floor can be walked on immediately after installation. During the first 15 days, wash with a wet cloth, avoiding excess water. Maintenance treatments should not increase the electrical resistance of the floor, so avoid paint treatments or application of greasy waxes.
BOX
12.91 m2
APPLY
Glued down
INSTALLATION
The laying surface shall be flat, smooth, dry, consistent, free of grease and cracks and maintain these characteristics over time. It shall be laid by simple spreading bonding using suitable adhesives according to the manufacturers’ instructions. In the case of laying on non-cellar subfloors or those without an aerated crawl space, waterproofing must be carried out before the screed is poured.
ACCESSORIES
ACCESSORIES
DECORS
DECORS
