Sannini Argille Cromatiche Flooring
ARGILLE CROMATICHE FLOORING
ARGILLE CROMATICHE FLOORING
Sannini’s Argille Cromatiche obtained through an accurate selection of raw materials, add to the artisan charm of hand made terracotta, the precious enrichment of natural minerals which chromatically transform the material.
Again manually pressed and shaped in single moulds, these products in exclusive colours are modelled in two different tonalities and formats.
INFORMATION
PAVEMENTS
Exeriors & Interiors
BRAND
Sannini
PRODUCT TYPE
Flooring
AVAILABLE COLORS
2
ENVIRONMENT
Indoor
MATERIAL
Cement
VERSION
It is laid in the same way as a hand made tile, according to the traditional system with 5 mm minimum joints. Also honed version available (h. 2,3 cm).
DESIGN
The originality of these clays permits the design of polychrome laying and the use of the material within new ambits where colour combinations and contrasts are experimented.
INSTALLATION
- Mortar or glue (middle bed).
- Minimum joint advised 5 mm
- After installation and grouting, acidwashing is requested to remove dirt, cement and efflorescences.
PRODUCTION
Made in Italy
DOWNLOADS
↓ Catelogue
↓ Data Sheet
USE
-Due to their physical-technical characteristics, “Argille Cromatiche” can be installed in interiors or exteriors. -Laying in freezing areas is allowed if the material is correctly installed and does not undergo any other surface treatment. -For inside use the material requires a protective treatment in order to preserve the material’s original aesthetic and physical characteristics and to maintain the tiles unaltered over the years.
COLORS
- Giallo
- Antracite
FLASH SYSTEM VERSION
The Earth Tones Cotto Sannini treated with Flashsystem l’an exclusive method of treatment carried out in the factory by Sannini. It entails a complete cycle of working, using avantgarde techniques and products studied to preserve the terracotta’s natural qualities as a sign of respect to the environment and its ecosystem.
All materials used for the treatment of Flash are non-toxic, and being water-based, do not contain solvents. Essential feature of Flashsystem is its in-depth protection which guarantees resistance to stains, damp rings and efflorescences, although the original transpiring nature of the material is maintained.
As a consequence, the cladding with these ready-to-use products presents itself with the colour and aspect of terracotta treated traditionally on site with acids and waxing. Such operations become superfluous since Flash products do not alter when laid if the mounting instructions are followed correctly.
FORMAT
SQUARED TYPE
MEASURE (IN)
- 16x16
- 12x12
THICKNESS (IN)
- 1.34
- 1.02
RECTANGLE TYPE
MEASURE (IN)
6x12
THICKNESS (IN)
1.02
STEP TYPE
MEASURE (IN)
10x14
THICKNESS (IN)
1.34
CORNER STEP TYPE
MEASURE (IN)
14x14
THICKNESS (IN)
1.34
BATTISCOPA TYPE
MEASURE (IN)
3.1x13
THICKNESS (IN)
0.71
