Watco Asphalt Paint
ASPHALT PAINT
ASPHALT PAINT
A solvent-free smooth, matte paint for internal and external asphalt surfaces, even in main traffic areas. The thick, flexible blacktop coating is easy to apply by brush or roller and is available in a range of attractive colors.
Asphalt Paint is ideal for use in warehouses, plant rooms, asphalt walkways on roofs, parking lots, line markings, tennis courts, playgrounds etc.
INFORMATION
USAGE
- Interior
- Exterior
BRAND
Watco
PRODUCT TYPE
Paint
FINISH
- Matte
- Smooth
COLLECTION
Asphalt
PRODUCTION
Made in United States
FEATURES AND BENEFITS OF ASPHALT PAINT
- Can be applied to damp surfaces
- Flexible, waterproof membrane
- Suitable for light to medium traffic
- Solvent-free, virtually odorless asphalt paint
- Unique formulation gives excellent resistance to UV and weathering
- Covers approximately 160 - 240 sq. ft. per gallon; one coat covers most surfaces
COLORS
- Black
- Navy Gray
- Tile Red
- Mid Blue
- Yellow
CURING TIME (HOURS)
24 Hours in 70°F
RECOMMENDED NUMBER OF COATS
1
SKU
B230230
AVAILABLE COLORS
5
SUITABLE FOR
- Brick
- Asphalt
- Concrete
- Masonry
- Similar Porous Surfaces
APPEARANCE
Colored, low to mid sheen finish depending upon substrate and number of coats applied.
STORAGE
Store in cool, dry conditions away from direct sunlight Protect from freezing
PACKAGING
One gallon
FLASHPOINT
>200°F (94°C)
COMPANION PRODUCTS
- J510001 - 18” Roller Frame and Handle
- J510002 - 18” Replacement Rolle
- J510004 - 4” Brush
SHELF LIFE
2 years
VOLATILE ORGANIC COMPOUNDS
<50 g/1
SKU
- B230429 - Navy Gray
- 8230828 - Tile Red
- B230230 - Black
- 8231431 - Yellow
- B2309155 - Blue
HOW TO APPLY
SURFACE PREPARATION
Ensure the surface is clean, sound and dry (slightly damp is acceptable), using a solvent free degreaser which can be used on asphalt and similar surfaces. Asphalt Paint can be applied to existing paint providing all poorly bonded material is removed and glossy surfaces are dulled by scuff-sanding with abrasive paper.
APPLICATION
Apply Asphalt Paint by brush, 3/8" nap roller or with our 18" roller frame and handle. One coat is generally sufficient although a second coat may be required on very porous or very rough surfaces. Avoid applying too thickly. Do not apply externally if rain or frost is forecasted or if the temperature is below 50°F.
In extreme temperature conditions, please contact a Watco Industrial Flooring Expert at (855) 627-6350.
COVERAGE
One gallon will typically cover 160-240 sq ft with one coat.
CLEAN-UP
Clean application tools in warm soapy water before the product has started to cure.
CURING TIME
The product will cure in 24 hours for light traffic; allow 48 hours before bringing the area back into full service. Cold, damp or humid weather will delay curing.
