BISAZZA VOLTERRA LICHENE LUX
VOLTERRA LICHENE LUX FLOOR TILES
Marble decorations for flooring and wall coverings, with 10 mm thickness, having various petrographic characteristics and shapes.
The items in the Marmo collection are supplied in readyto-install units glued to paper mesh backing, with 2 mm grout lines. The Marmo range is available in the LUX version with polished finish, as well as in the MATT version with an opaque finish.
INFORMATION
COLLECTION
Volterra
BRAND
Bisazza
PRODUCT TYPE
Floor TIles
PRODUCTION
Made in Italy
DIMENSIONS
- Height : 24.5 cm
- Width : 19.8 cm
THICKNESS
10 mm
SHAPE
See paragraph 10
WEIGHT
24 - 26 kg/sqm
RECOMMENDED JOINT FOR INSTALLATION
2 mm
OUTDOOR FLOOR
Not suitable
OUTDOOR WALL
Not suitable
INDOOR FLOOR
Medium traffic flooring for residential and commercial environments (shops, restaurants, etc.)
INDOOR WALL
Suitable
SHOWER
suitable 1
SWIMMINGPOOL AND SPA
Not suitable
FEATURES
- The matt finish is achieved through grain P320 sanding.
- For a better aesthetic result, we recommend to carry out a tentative dry installation first, in order to ensure a pleasant final effect.
DETAL
The items in the Marmo collection, 1 cm thick, are honed, with a polished finish, and supplied in a ready-to-install units glued to paper mesh backing, with 2 mm grout lines.
FINISHING
Prefinished and sanded with polished finish
MESH/PAPER MOUNTED
Paper mesh
VARIATIONS
Every piece of marble is unique, even if obtained from the same block. Variations in the color and veining of the marble slabs is characteristic to the natural material and a distinctive feature of the product.
APPLICATIONS
- Outdoors : Not suitable
- Pools : Not suitable
- Indoor Walls : Residential and public buildings
- Floors : For residential and commercial areas with low and medium foot traffic, such as private offices, shops, restaurants and hotels (except for heavy foot traffic areas such as lobbies or hallways).
- Bathrooms And Spas : Suitable for use in bathrooms. Suitable for use in showers or other areas in direct contact with water, following appropriate treatment after installation.
JOINT
~2mm – ~3/32”
QUANTITY PER CARTON
0,47 m2
STRENGTHS
- Bisazza offers a series of patterns inspired by the tradition of an eclectic use of colors for stone flooring, with a contemporary feel.
- Squares, hexagons, triangles and trapezoids come together in two-tone patterns and decorative designs with a 3D look.
- The polished and matt finish marble elements are supplied as preassembled modules mounted on a paper mesh support for an easier installation (grouting is required).
CLEANING & MAINTENANCE
TREATMENTS
- After laying and grouting, we recommend a protective treatment is applied to the marble floor before using it for the first time.
- Before applying any treatment, clean the surface as described under “Routine cleaning”.
ROUTINE CLEANING
- Clean regularly using low-residue neutral detergents, such as CLEANER PRO FILA* diluted 1:200 in water (half a small coffee cup of detergent in 5 liters of water). Use warm water and wring the mop out well, rinsing the mop often in the detergent solution.
- This operation can also be carried out using floor cleaning machines and appropriate microfiber discs, avoiding nylon brushes.
SOLVENT-BASED SEALANT FOR BATHROOMS AND SHOWERS & WATER-BASED SEALANT
- At least 3 hours after cleaning with CLEANER PRO FILA*, check that the marble surface is clean and dry, i.e., free of any dark halos due to residual humidity. If so, proceed with application of two coats, applied 12 hours apart, of the solvent-based sealant MP90 FILA*.
- Apply the product using a clean, dry lambswool applicator, paintbrush or similar applicator, rubbing the product repeatedly over the surface to ensure the product penetrates into the marble and joints. For application on vertical surfaces, begin spreading the product from the highest point of the wall to prevent the product from dripping onto a surface that has already been treated. Remove any excess drips or runoff before it dries.
- After application of the MP90 FILA* product, wait at least 3 hours before touching and/or walking on the surface and, only if strictly necessary, do so wearing gloves and/or completely clean white cotton socks.
- Wait at least 24 hours before using the surfaces or applying subsequent treatments. While the worksite is active, be very careful not to spill any aggressive substances onto the surface, especially acidic substances which are highly corrosive for stone materials. For this reason, we recommend protecting the surface by covering it with paper cloths or TNT, avoiding nylon sheets that prevent natural transpiration of the stone and can create condensation, and boxes that can transfer tannin or print onto the stone.
