Bisazza Pienza Nero Matt Floor Tiles
PIENZA NERO MATT FLOOR TILES
PIENZA NERO MATT FLOOR TILES
The items in the Marmo Matt collection, 1 cm thick, are honed, with an opaque finish, and supplied in a ready-to-install units glued to paper mesh backing, with 2 mm grout lines.
The Marmo range is available in the LUX version with polished finish, as well as in the MATT version with an opaque finish.
INFORMATION
BRAND
Bisazza
PRODUCT TYPE
Floor TIles
COLLECTION
Pienza
PRODUCTION
Made in Italy
DIMENSIONS
- Height : 34.8 cm
- Width : 37.3 cm
SHOWER
Not Suitable
MARBLE
- Bianco Carrara
- Nero Marquinia
OUTDOOR WALL & FLOOR
Not Suitable
INDOOR WALL
Suitable
JOINT
~2mm – ~3/32”
SWIMMINGPOOL AND SPA
Not Suitable
STRENGTHS
- Bisazza offers a series of patterns inspired by the tradition of an eclectic use of colors for stone flooring, with a contemporary feel. -Squares, hexagons, triangles and trapezoids come together in two-tone patterns and decorative designs with a 3D look. -The polished and matt finish marble elements are supplied as preassembled modules mounted on a paper mesh support for an easier installation (grouting is required).
THICKNESS
10 mm
MODULES PER BOX
6
RECOMMENDED JOINT FOR INSTALLATION
2 mm
INDOOR FLOOR
Medium traffic flooring for residential and commercial environments (shops, restaurants, etc.)
QUANTITY PER CARTON
0.61 m2
WEIGHT
24 - 26 kg/sqm
FINISHING
Prefinished and sanded with opaque finish
NATURAL STONES
- Avorio Perlino
- Giallo Reale
- Rosso Alicante
- Verde imperiale
- Marrone Emperador
TECHNICAL FEATURES
-Every piece of marble is unique, even if obtained from the same block. Variations in the color and veining of the marble slabs is characteristic to the natural material and a distinctive feature of the product. -For a better aesthetic result, we recommend to carry out a tentative dry installation first, in order to ensure a pleasant final effect. -The matt finish is achieved through grain P320 sanding.
MESH/PAPER MOUNTED
Paper Mesh
DOWNLOAD
↓ Data Sheet
CLEANING & MAINTENANCE
ROUTINE CLEANING
- Clean regularly using low-residue neutral detergents, such as CLEANER PRO FILA* diluted 1:200 in water (half a small coffee cup of detergent in 5 liters of water). Use warm water and wring the mop out well, rinsing the mop often in the detergent solution.
- This operation can also be carried out using floor cleaning machines and appropriate microfiber discs, avoiding nylon brushes.
TREATMENTS
- After laying and grouting, we recommend a protective treatment is applied to the marble floor before using it for the first time.
- Before applying any treatment, clean the surface as described under “Routine cleaning”.
SOLVENT-BASED SEALANT FOR BATHROOMS AND SHOWERS
- At least 3 hours after cleaning with CLEANER PRO FILA*, check that the marble surface is clean and dry, i.e., free of any dark halos due to residual humidity. If so, proceed with application of two coats, applied 12 hours apart, of the solvent-based sealant MP90 FILA*.
- After application of the MP90 FILA* product, wait at least 3 hours before touching and/or walking on the surface and, only if strictly necessary, do so wearing gloves and/or completely clean white cotton socks.
WATER-BASED SEALANT
- At least 3 hours after cleaning with CLEANER PRO FILA*, check that the marble surface is clean and dry, i.e., free of any dark halos due to residual humidity. If so, proceed with application of the water-based sealant MP90 ECO XTREME FILA*.
- Apply the product using a clean, dry lambswool applicator, paintbrush or similar applicator, rubbing the product repeatedly over the surface to ensure the product penetrates into the marble and joints. For application on vertical surfaces, begin spreading the product from the highest point of the wall to prevent the product from dripping onto a surface that has already been treated. Remove any excess drips or runoff before it dries.
- After application of the MP90 ECO XTREME FILA* product, wait at least 3 hours before touching and/or walking on the surface and, only if strictly necessary, do so wearing gloves and/or completely clean white cotton socks.
- Wait at least 24 hours before using the surfaces or applying subsequent treatments. While the worksite is active, be very careful not to spill any aggressive substances onto the surface, especially acidic substances which are highly corrosive for stone materials. For this reason, we recommend protecting the surface by covering it with paper cloths or TNT, avoiding nylon sheets that prevent natural transpiration of the stone and can create condensation, and boxes that can transfer tannin or print onto the stone.
