Sannini Sannini Surface Flooring
SANNINI SURFACE FLOORING
SANNINI SURFACE FLOORING
Gently brushed and honed
Extruded terra cotta obtained through a new procedure studied to create a soft, velvety finish.
With Superficie Sannini a refined alternative to the brushed terracotta, reinterpreting a solid tradition in an original way, is offered.
INFORMATION
PAVEMENTS
Exeriors & Interiors
BRAND
Sannini
PRODUCT TYPE
Flooring
WIDTH OF JOINTS MINIMUM
3 mm
ENVIRONMENT
Indoor
MATERIAL
Cement
INSTALLATION
- Mortar or glue.
- Minimum joint advised 3 mm.
- After installation and grouting, acidwashing is requested to remove dirt, cement and efflorescences.
SYSTEM
Achieved prior to firing with special abrasive grindstones. It is laid according to the traditional system or with adhesive. Advised width of joints minimum 3 mm. For indoor and outdoor use irrespective of environmental or climatic factors.
PRODUCTION
Made in Italy
DOWNLOAD
↓ Data Sheet
USE
-Due to its physical-technical, “Poggio Sannini” can beinstalled in interiors or exteriors. Laying in freezing areas is allowed if the material is correctly installed and does not undergo any other surface treatment. -For inside use the material requires a treatment or we recommend the use of our factory-finished series, see chapter “Flash system”.
FLASH SYSTEM VERSION
The Superficie Sannini Sannini treated with Flashsystem l’an exclusive method of treatment carried out in the factory by Sannini. It entails a complete cycle of working, using avantgarde techniques and products studied to preserve the terracotta’s natural qualities as a sign of respect to the environment and its ecosystem.
All materials used for the treatment of Flash are non-toxic, and being water-based, do not contain solvents. Essential feature of Flashsystem is its in-depth protection which guarantees resistance to stains, damp rings and efflorescences, although the original transpiring nature of the material is maintained.
As a consequence, the cladding with these ready-to-use products presents itself with the colour and aspect of terracotta treated traditionally on site with acids and waxing. Such operations become superfluous since Flash products do not alter when laid if the mounting instructions are followed correctly.
FORMAT
SQUARED TYPE
MEASURE (in)
12x12
THICKNESS (in)
0.55
RECTANGLE TYPE
MEASURE (in)
6x12
THICKNESS (in)
0.55
STEP TYPE
MEASURE (in)
12x14
THICKNESS (in)
0.55
CORNER STEP TYPE
MEASURE (in)
14x14
THICKNESS (in)
0.75
SKIRTING TYPE
MEASURE (in)
3.5x13
THICKNESS (in)
0.55
SKIRTING STEP TYPE
MEASURE (in)
3.5x18
THICKNESS (in)
0.55
