Volteco, S.p.a.

Volteco Sanofer Mortars

SANOFER MORTARS

Volteco Sanofer Mortars

SANOFER MORTARS 

Cement-based protective coating specific for protecting reinforcement rods.

INFORMATION

BRAND 

Volteco

COLLECTION

Sanofer

PRODUCT TYPE 

Mortars

PRODUCTION

Made in Italy

CONSUMPTION AND YIELD 

-30 g/m (for Ø 8 mm improved adhesion bars with 2 coats of 200 micron each) -60 g/m (for Ø16 mm improved adhesion bars with 2 coats of 200 micron each)

ADVANTAGES 

- Easy and quick application
- Use directly on exposed steel bars
- Also effective on rust-corroded rods
- Excellent grip for future repair mortars

Volteco Sanofer Mortars

MATERIAL 

Cement

APPEARANCE 

Grey Powder

APPLICATION 

Damaged reinforcement bars in deteriorated concrete

PACKAGING AND STORAGE 

-Sanofer is packed in 1 kg pails.  -The product must be stored in a dry place without being exposed to frost and heat. -Sanofer in the original packaging has a storage time of 18 months

Volteco Sanofer Mortars

WORKABILITY TIME AT +20°C 

20’

SPECIFIC WEIGHT 

> 1.6 kg/l

PREPARATION 

The preparation and installation data refer to normal environmental conditions (temperature +20°C; relative humidity 60%).

FEATURES 

- Corrosion protection : No corrosion (UNI EN 15183)
- Shear adhesion : ≥ 80% of the value of the exposed bar (UNI EN 15184)

DETAIL

-The product must be used within 20 minutes after mixing.  -Do not apply the product at temperatures below +5°C. -Do not add water to extend the pot life.

PREPARING THE SURFACES 

Sanofer is able to ensure protection, even when applied to rusty rods; any rust not adhering perfectly to the rod must be removed beforehand with thorough brushing.

Volteco Sanofer Mortars

PREPARING AND APPLYING THE MIXTURE 

Sanofer is ready to use; mixing water must be added as follows:

-Pour the mixing water into the pot (0.25 l per bag equivalent to 25% in weight) -Slowly add SANOFER while the paint mixer is on at medium speed  -Mix for approx. 2 minutes, until the mixture is completely smooth -Apply SANOFER with a medium bristle brush -Ideal protective thickness is 200-300 micron.

Volteco, S.p.a.
T +39 0422 9663 F +39 0422 966401
Volteco, S.p.a.
Via delle Industrie, 47, 31050 Ponzano Veneto TV, Italy