Falmec Pure Steel Corner Taps
PURE STEEL CORNER TAPS
INFORMATION
COLLECTION
Pure
BRAND
Falmac
PRODUCT TYPE
Taps
PRODUCTION
Made in Italy
TECHNICAL FEATURES
Cut-out diameter 35 mm
INSTALLATION
Corner
CONTROLS
None
PACKAGING VOLUME
0.01 m³
DIMENSIONS
Single-lever sink mixer with swivel spout and pull out hand shower 3/8” female connection hoses
APPLICATION
Kitchen
USE
Indoor
NOTES
Water, like air, is a fluid transparent and vital element. Falmec transfers its experience from one element to the other, presenting a range of solutions for the use of water in the kitchen.
FUNCTION
Water, like air, is a fluid transparent and vital element. Falmec transfers its experience from one element to the other, presenting a range of solutions for the use of water in the kitchen.
DETALI
PACKAGING DISPOSAL
- Don’t dispose the packaging or parts of it in the environment.
- Plastic bags in particular can be source of asphyxia for children.
- Please, empty, reduce the volume and separate the different packaging materials according to the symbols of the waste sorting, in order to carry out correctly the recycle and the recovery.
ASSEMBLY
- 1 : Rinse out pipes to eliminate all traces of dirt
- 2 : Set the tap in the hole making sure the seal between the tap and the supporting surface in place. Fix everything using the nut, washer and gasket.
- 3 : connect the flexible supply hoses to the main water supply making sure that the hot water supply is to the left of the tap.
- Warning : during the connection to the water network, keep the hose steady to prevent it from unscrewing from tap’s body.
CLEANING AND MAINTENANCE
- Clean the aerator filter on a regular basis and immediately after using it for the first time to keep pressure at full strength.
- Steel is a material absolutely free of carcinogenous substances or dangerous to health and does not allow the development of germs and bacteria.
- To keep it in good condition it’s very important that the surfaces remain clean and dry. It’s recommended to clean the taps exclusively with water and soap, avoiding the Use of abrasive detergents (powder or liquid) or other products containing alcohol, chlorides, acids or other aggressives.
- If it come in contact with any aggressive product, rinse thoroughly and dry with a soft cloth. The company will not respond to any damages caused by failure to observe the above rules.





