Azichem Stucco Balcony Sealants
STUCCO BALCONY SEALANTS
STUCCO BALCONY SEALANTS
Two-component cement surfacer, waterproof, high adherence
A two-component, fine cementitious grout with a fluid plastic consistency for grouting uncovered joints or filling and finishing static cracks, micro- and macro-cavities and so on between flooring tiles, before applying Protech Balcony for breathable non-film waterproofing operations on terraces and balconies.
KEY FEATURES
KEY FEATURES
resistant
months
INFORMATION
BRAND
Azichem
PRODUCT TYPE
Sealent
CONSUMPTION
Approximately 1.75 kg of stucco balcony for each cubic decimetre of volume to be grouted.
METHODS
- Spatula
- Sponge
- Sponge float
COLLECTION
Stucco
PRODUCTION
Made In Italy
APPLICATION
Fields of specific putty for the preliminary preparation of supports (open gaps, micro and macro-cavities and fissures) for the subsequent application of protech balcony on terraces and balconies.
APPEARANCE
Liquid + Powder
COMPONENTS
Two-components
PREPARATION OF SUPPORTS
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "Saturated with dry surface".
DENSITY
2000 g/l
ALLOWED SUPPORTS
Tiles
COMPLETE HARDENING AT 20°C A 20°C
180 min
CAPILLARY ABSORPTION UNI EN 13057
0.10 kg•h^0.5/m²
FLEXURAL STRENGTH AFTER 28 DAYS UNI 1015-11
> 5 N/mm²
ENVIRONMENT
Outdoor
TOOL CLEANING
Water
PACKAGING AND DIMENSIONS
- Pail 4 kg [A]
- Bottle 1 kg [B]
- Bucket 0.8 kg [A]
- Bucket 0.2 kg [B]
- Kit: 1 Pail 4 kg [A] + 1 Bottle 1 kg [B]
- Kit: 1 Bucket 0.8 kg [A] + 1 Bucket 0.2 kg [B]
CUSTOMS CODE
3824 5090
AVAILABLE COLOR
Light gray
LINES OF BELONGING
COMPRESSIVE STRENGTH AFTER 28 DAYS UNI 1015-11
> 20 N/mm²
MIXING RATIO OF THE COMPONENTS A:B
4:1
APPLY
By Hand
STORAGE AND CONSERVATION
Protect from freezing.
MODE OF USE
Add the quantity of component b required to obtain the desired consistency to component a; mix thoroughly until a homogeneous lump-free mixture is obtained.
Place on site using a spatula, sponge float or simply with the fingers of the hand (wearing a rubber glove).It is possible to correct the consistency, where necessary, by adding moderate quantities of water to the ready mixture.In the cases of coloured surfacings, it is recommended to mix the two-component with small amounts of coloured pigments that can be purchased at any paint shop.