Azichem Protech Flex
PROTECH FLEX
PROTECH FLEX
Polyurethane sealant in a cartridge with a high modulus of elasticity
A single-component, moisture-curing and fast-hardening polyurethane sealant with a medium-to-high modulus of elasticity, remaining permanently elastic yet with high surface hardness and being tear- and weather-resistance and paintable.
INFORMATION
BRAND
Azichem
PRODUCT TYPE
Sealent
APPLICATION METHODS
- Apply by hand
- Dispensing gun
PROTECH FLEX
- Free of shrinkage and dimensionally stable.
- It is not sticky and does not accumulate dust and dirt.
- Over-paintable after polymerisation has been completed.
- Free from solvents, PVC, halogenated compounds, odourless.
- Permanently elastic, high resistance to raging and to the atmosphere.
- High thixotropy: it does not drip and does not create burrs. Easy workability.
SHELF-LIFE
12 months
DENSITY
1.30 (± 0.05) g/cm³
PACKAGING AND DIMENSIONS
- Cartridge 600 cc
- Cartridge 300 cc
- Box: 12 x (Cartridge 300 cc)
- Box: 20 x (Cartridge 600 cc)
COLLECTION
Protech
PRODUCTION
Made In Italy
USE
Outdoor
WORKING TEMPERATURE
-40/+80 °C
BREAKING LOAD LONGITUDINAL DIN 53504
1.5 N/mm²
LONGITUDINAL ELONGATION AT BREAK DIN 53504
≥300 %
AVAILABLE COLORS
- Grey
- White
- Black
APPEARANCE
Paste
STORAGE AND CONSERVATION
Protect from freezing.
KEY FEATURES
- UV-resistant
- Nonflammable
- Use wearing protective gloves
ALLOWED SUPPORTS
-Tiles -Plasters -Concrete -Cement-based or lime-based mortars -Prefabricated concrete -Drywall -Wood -Metal surfaces -Plastic -Fiber-cement -Floor screed
DRY RESIDUE 10’ A 150°C
≥95 %
HARDNESS DIN 53505 - SHORE A
40
MODE OF USE
Slowly and carefully extrude the sealant from the cartridge in the specially prepared seat of the joint, with the appropriate gun (of the type for silicone). Before the total hardening of the sealant, spread it to the brim with spatula on the surface of the joint. After hardening, remove the adhesive tape. Clean any product overflows from the seat of the joint with suitable solvents (like acetone or Nitro thinner).
FIELDS OF APPLICATION
The high versatility and excellent adhesion to different media make Protech Flex the most suitable adhesive sealant for flooring and roofing joints made of concrete, wood products, steel, stainless steel, aluminium, anodised aluminium, galvanized steel sheets, copper, plastics, etc.
CONSUMPTION
Indicative consumption with a 300 cc Protech Flex cartridge: 5x2,5 mm joint = 20 linear metres; 10x5 mm joint = 6 linear metres; 15x7,5 mm joint = 2,5 linear metres; 20x10 mm joint = 1.5 linear metres
COMPLETE HARDENING AT 20°C A 20°C
24 h
STATIC ELASTIC MODULUS DIN 53504
0.6 N/mm²
CUSTOMS CODE
3909 5090
TEMPERATURE OF USE
+5 / +35 °C
TOUCH HARDENING AT 20°C A 20°C
60 min
COMPONENTS
Single-component
TOOL CLEANING
Nitro thinner
PREPARATION OF SUPPORTS
The application supports must be perfectly clean and dry, free from dust and soiling. Preliminarily treating the side walls of the joint with the appropriate primer single-component polyurethane Protech Flex Primer.
It is appropriate to provide for inserting into the joint, whatever its nature, the specific foamed polyethylene kerb Filtene Fondogiunto, of the appropriate size to the joint to be sealed. Prepare an easily removable paper ribbon (coachbuilder ribbon type) on both sides of the joint, in order to prevent the sealant overflowing outside of the natural seating of the joint.