Kimia Kimifloor Vetro Resin
KIMIFLOOR VETRO RESIN
KIMIFLOOR VETRO RESIN
Kimifloor VETRO is a two component low viscosity transparent fluid epoxy resin, characterized by excellent chemical resistance, good water resistance and high yellowing resistance.
INFORMATION
BRAND
Kimia
PRODUCT TYPE
Resin
MAX THICKNESS PER COAT
2 mm
RESIN/HARDENER RATIO
100/50 in weight
STORAGE
The product is sensitive to humidity, keep in tightly closed containers, in a sheltered and dry place at a temperature not lower than + 10°C. In these conditions, its stability is 12 months.
FROST TIME
40 mins
PRODUCTION
Made in Italy
MIN. TEMPERATURE OF APPLICATION
10 °c
COLOR
Transparent
CONTAINERS
2
SETTING TIME OF A THIN FILM ASTM D1640
5.5 h
USES
Thanks to its excellent transparency, Kimifloor VETRO can be used as a protective finishing layer for interior decorative resin floors. It must always be protected with a final coat of Kimifloor ECO-FINITURA PLUS.
ADVANTAGES
Excellent transparency; excellent chemical resistance, good water resistance and high yellowing resistance.
COMPONENT
Two-component, fluid, transparent epoxy resin for thick vitrification and incorporation of objects in the case of decorative resin flooring
PACKAGING
- Cop. 6 Kg (A+B)
- Cop. 18 Kg (A+B)
MECHANICAL COMPRESSIVE STRENGTH (HEAD WITH PRISMS 4X4X17 CM)
- 2 days > 22 MPa
- 3 days > 27 MPa
- 7 days > 45 MPa
CONSUMPTION
1.04 Kg/m²/mm
DOWNLOAD
↓ Technical Sheet
APPLICATIONS
-The surfaces to be treated must be perfectly dry (new concrete must be cured for at least 4 weeks), free of inconsistent parts and free of dust, grease, paints and release agents in general. -Pour component "B" (hardener) into component "A" (resin) and mix with a low speed drill (200-300 per minute) until a you get a perfect mixture, taking care not to incorporate air during mixing.
-In case of fractional mixing, respect the ratios by weight (and not by volume) indicated on the packaging. Before applying the final two-component polyurethane protective coat which must be applied over Kimifloor VETRO (after sanding and vacuuming) wait until the transparent epoxy resin has developed adequate mechanical properties. -Walkability time depends on the application thickness (the material can be given with a thin film or up to a thickness of 2 mm) and on the thermo-hygrometric conditions (it is advisable to wait at least 7 days).