Daltile Bonnet Contempee Wall Tile

Thu Dec 25, 2025Wall TilesBeautifyEarthenware

BONNET CONTEMPEE WALL TILE

BONNET CONTEMPEE WALL TILE

Run is a high-performance, high-efficiency fan coil designed for use with heat pump systems.

Contempee offers a garden of choice and color to suit every design aesthetic.

INFORMATION

BRAND

Daltile

PRODUCT TYPE

Radiator

SHOWER FLOORS (RESIDENTIAL OR LIGHT COMMERCIAL)

≥0.42

POOL LININGS TARGET DCOF WET

No

PRODUCTION

Made in USA

COLOR CODE

CE32

FINISH

Glossy

EXTERIOR FLOOR APPLICATIONS (INCLUDING POOL DECKING & OTHER WET AREAS WITH MINIMAL FOOTWEAR)

≥0.60

APPLICATION NOTES

Crackle tile must be sealed with a penetrating sealer prior to grouting to prevent the grout from staining the tile. For best results, use a grout color to match the tile. - Any contact with staining agents including food should be cleaned immediately. - Not recommended for wet areas, countertops or floors. - Periodic resealing of crackle tile is required.

AVAILABLE COLORS

Four

DRY & LEVEL - INTERIOR FLOOR

No

SCRATCH HARDNESS

- Test Method : ASTM MOHS
- Result : 4.0-6.0

DOWNLOADS

↓ Sales Sheet
↓ Safety Data Sheet

BREAKING STRENGTH

- Test Method : ASTM C648
- Result : 120-230 lbs

CHEMICAL RESISTANCE

ASTM C650

RAMPS & INCLINES

≥0.65

WALLS/BACKSPLASHES SUITABLE

Yes

GROUT JOINT RECOMMENDATION

1/16"

WATER ABSORPTION

- Test Method : ASTM C373
- Result : < 20.0

MANUFACTURER ADVISORY

All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.