Lab23 Tree Grilles: Lab.sp.003
TREE GRILLES: LAB.SP.003
TREE GRILLES: LAB.SP.003
The tree grilles LAB SP are made in steel. Different patterns and dimensions are available with the laser-cut.
INFORMATION
PRODUCTION
Made in Italy
BRAND
lab23
PRODUCT TYPE
Display Board
DESIGN
Urban Design
DETAIL
Steel EN10111DD11 is used for the realization of this product made in Italy and all the elements in this material, after all the different stages (cutting, bending, welding), are treated with electrogalvanizing according to the UNI regulations and are later polyester powder-coated with RAL colours at choice.
USE
Outdoor
STEEL SHEET
30/10 Thickness
ELEMENTS
12×18 mm
HOLE
Specific Countersunk Holes M6
TAGS
- Acciaio
- Lab.sp.
DIMENSIONS
- 735×735 mm, opening 320 mm
- 990 x 990 mm, opening 500 mm
- 1440 x 1440 mm, opening 800 mm
- 1990 x 1990 mm, opening 800 mm
- 1190 x 1190 mm, opening 600/800 mm
THICKNESS
(50/10)
FRAME
Devided Into 4 Parts
DETAIL
The smaller tree grilles, LAB SP. 735 mm, are made of 4 elements: two shaping the grille and two shaping the perimetral frame. The grilles LAB SP. 990Mm are made of 6 elements: the upper grille is divided into 4 parts and the frame into 2 parts. The bigger grilles LAB SP are made of 8 elements: both the upper grille and the frame are devided into 4 parts. The upper part of the grilles is the result of laser-cut steel sheets (50/10 thickness), whereas the frame is made in steel sheet, 30/10 thickness. If present, the frame is fixed to the ground through specific bolts (not provided) to be inserted on elements 12×18 mm. The tree grilles are fixed to the ground (or to the frame if present) through specific countersunk holes M6.
