Volteco Aquascud System 430 Waterproof Coating

Tue Dec 03, 2024Waterproofing MaterialsConstructionCementVolteco, S.p.a.

Aquascud System 430 WATERPROOF COATING

AQUASCUD SYSTEM 430 WATERPROOF COATING

Two-component elastic waterproofing product, ideal for waterproofing terraces, balconies and flat roofs.

information

ADVANTAGE

- Resistant to U.V. radiation
- It maintains deformability to -20°C
- For waterproofing without demolition.
- Low environmental impact thanks to reduced CO₂ emissions, very low Volatile Organic Compound emissions (VOC), components obtained from recycling processes

BRAND

Volteco

PRODUCT TYPE

Waterproof Coating

MATERIAL

Cement

APPEARANCE

Grey Powder - White Latex

LIQUID/POWDER MIXING RATIO

1/2

WORKING TEMPERATURE

-20°C +60°C

RECYCLING PROCESSES

Low environmental impact thanks to reduced CO₂ emissions, very low Volatile Organic Compound emissions (VOC), components obtained from recycling processes

PRODUCTION

Made in Italy

WORKABILITY TIME AT +20°C

20’

MAXIMUM AGGREGATE SIZE

0.7 mm

SPECIFIC WEIGHT

> 1.6 kg/l

ELONGATION AT BREAKING POINT

> 40%

SURFACES

Excellent adhesion to all cement, masonry, ceramic and marble surfaces

CERTIFICATION

The product helps earning points for LEED certification

THICKNESS

3 mm

RESISTANCE AT BREAKING POINT

> 0.6 kN/m

PRODUCT APPLICATION

-Substrates in general, also lightened with expanded clay -Waterproofing of flat roofs, balconies, terraces and sloped floors, with flooring already installed, with waterproofing surface that can remain exposed protected by coatings (tiles, concrete floors, green roofs,etc.)

PREPARING THE SURFACES

Remove all dirt and any other material that could compromise adhesion of AQUASCUD. Restore very irregular surfaces with FLEXOMIX 30 mortar (see the related technical data sheet). If the surfaces are old or dusty, apply PROFIX 30 primer (see the related technical data sheet) with a roller, a brush or by spray, ensuring it does not bleed on the surface due to the surface not absorbing it. With surfaces that are partially water-soaked, with a relative surface humidity of no more than 10% (measured with a Storch electric hygrometer) apply PROFIX 80 product (see relevant technical data sheet).

APPLICATION

For negative/positive hydrostatic pressure waterproofing of wall surfaces or concrete, affected by slight settlements and/or movements. Particularly suitable for :

- Balconies
- Substrates in general, also lightened
- Slabs and structures exposed to contact with water
- Reinforced concrete foundation walls of underground premises
- Roofs and screeds temporarily waterproof awaiting definitive works

- Protection of reinforced concrete surfaces with inadequate concrete cover thickness
- Ledges, concrete gutters, flower boxes (set-up anti-root protection beforehand) and wells
- Tanks, canals, swimming pools and structures designed to contain water, including drinking water
- All indoor surfaces such as kitchens, bathrooms and showers even if made of gypsum board or fibre concrete
- Protection of concrete from CO₂ penetration, contact with sea water, de-icing salts, aggressive atmosphere, etc.