
Jaga1 Strada Hybrid Aco Radiators
STRADA HYBRID ACO RADIATORS
STRADA HYBRID ACO RADIATORS
The most compact heating unit can now also be used for cooling.
Strada Hybrid switches fully automatically between heating and light cooling
INFORMATION
FEATURES
-From the designers of the first low temperature heater -Improves the seasonal efficiency of each heat pump -Makes sure that the condensing boilers are operating at their lowest temperature and as efficiently as possible. -Energy-efficient non-condensing cooling in combination with any heat pump that can supply cooling water -Electrical safety class IP 44splash-proof, suitable for zone A -The digital Ecodesign control ensures a stable and accurate temperature
PRODUCTION
Made in Belgium
TEMPERATURE
Most compact radiator for low water temperature
HEAT EXCHANGER
Low-H2O heat exchanger with wall brackets and fixing kit, air vent 1/8" and drain plug 1/2"
MANUFACTURER
Jaga
STANDARD
Outputs meet standard EN 16430.
ASSEMBLED
Partially assembled casing for a connection on the bottom left or bottom right
MODEL
Strada Hybrid Type 11 / Strada Hybrid Type 16
OPTIONS
- Connection Sets
- Calorimeter Holder
- –Towel rail in chrome-plated aluminium
CONSTRUCTION
-Easy to install fan unit with operation, control and 24VDC power supply -Cover plate in stainless steel effect for the side panel at the opposite end from the valve -This heater is not equipped with a condensation monitor. It has to be integrated into the installation (only for cooling).
DETAIL
HEATING SET
–Low-H2O heat exchanger is composed of round, seamless circulation tubes made of pure red copper, with pure aluminium fins and two brass collectors for left or right 1/2” same end connection. Extended air vent 1/8” and drain plug 1/2” are included. Pressure test: 20 bar Working pressure: 10 bar
–Brackets: galvanised steel plate thickness 1 mm, dark grey lacquered RAL 7011, with a maximum intermediate distance of 1.05 m
CASING
–Front panel: electrolytic, galvanised steel plate of 1.25 mm thick Side panels: electrolytic, galvanised steel plate of 1.25 mm thick with hole for integrated Jaga valve, inclusive metalised cover plates for the un-used hole. Wall slat: electrolytic, galvanised steel plate of 1.25 mm thick
–Inversed aluminium top grille coated in the same colour as the casing. Strong and functional packaging, can be used as a protection cover during construction works.
STRADA HYBRID SWITCHES FULLY AUTOMATICALLY BETWEEN HEATING AND LIGHT COOLING
You don’t have to do anything at all to switch between heating and cooling. Thanks to its accurate room and water temperature sensors the Hybrid heater does this automatically.
- Bedroom mode max. 26 dB(A)
- omfort position max. 30 dB(A)
- Maximum position for rapid heating or cooling
- The default auto-change-over ACO mode with 3 operating positions.
Freeze function: fan activated airflow that doesn’t require any cool water.
HOW TO INSTALL
The building services engineer chooses the heating elements considering the following conditions: –a heat output calculation according to the standard.
–Tables of heat outputs and dimensions according to EN 16430 –The heating elements are placed under the windows: they must be at least as wide as the window, taking into account the heat loss calculation. –The minimum space requirement under the heating elements is 12 cm
–The heating elements are connected to a one-pipe installation / two-pipe installation, with a single-sided connection. The supply must always be at the top. –Applicable connection sets Jaga / Jaga-H / Jaga Crossflow, can be connected to plastic central heating service pipes/ RPE/ALU. tube / precision metal tube / steel pipe. The valve body is concealed within the standard casing. –Thermostatic head: Jaga thermostatic heads / Jaga Deco thermostatic heads chrome / Jaga Deco thermostatic heads chrome/white ./ Jaga Comap thermostatic heads silver / remote controlled Jaga thermostatic heads / Jaga Deco thermostatic heads chrome/white with sensor at distance / not to be fitted
COLORS
