Jolly Mec Aerjolly 80 Evo Fireplace
AERJOLLY 80 EVO FIREPLACE
AERJOLLY 80 EVO FIREPLACE
The aerjolly 80 evo wood-burning fireplace uses evo technology to meet efficiency and room emission limits. With aerjolly 80 evo you can choose to heat the room naturally, by radiation or by forced air with a fan. Aerjolly evo allows you to duct the warm humidified air and achieve even heat in several rooms.
INFORMATION
MODEL NAME
Aerjolly 80 Evo 15 Kw
BRAND
Jolly Mec
PRODUCT TYPE
Fireplace
SEASONAL ENERGY YIELD
68 (%)
USE
Heating
ENVIRONMENT
Indoor
DM CLASSIFICATION NO. 186 - STARS (ITA)
4
AVERAGE FLUE GAS TEMPERATURE
278.2 (°C)
DOWNLOADS
↓ DOP
↓ Manual
↓ Energy label
↓ Product Sheet
↓ Ecodesign documentation
↓ Remote Control and/or Electronics Manual
↓ End-of-life disposal of luminaire components
OIAT (CH)
Yes
DTA (FR)
No
ENERGY LABEL
WEIGHT
316 kg
ENERGY CLASS
A+
MINIMUM DRAUGHT
10 Pa
IIE - ENERGY EFFICIENCY INDEX
102
DIMENSIONS
- Height : 166 cm
- Width : 60 cm
- Length : 91 cm
HERMETICITY
No
ECODESIGN (EU)
Yes
CONTO TERMICO (ITA)
No
BAFA (DE)
No
BLMSCHV II (DE)
Yes
AIR INLET DIAMETER
120 mm
SMOKE OUTLET DIAMETER
250 mm
FEATURES
- Water
- Wood
- Fireplace
DESIGN
The elegant design of the up-and-over door enhances the width of the glass, offering a wonderful view of the flame. The white ceramic refractory combustion chamber completes the aesthetic effect. Aerjolly 80 evo can also be operated without electricity and is suitable for passive houses.
BURNED POWER
19.1 kw
NOMINAL POWER
14.8 kw
FEATURES
AIRSCREW SYSTEM
Increases heat exchange efficiency and balances flue gas extraction. The patented double spiral propeller system (Airscrew System) allows additional heat to be recovered at the outlet of the fireplace.
FOR PASSIVE HOUSES
The combustion air is taken from the outside through the direct connection with the air intake.
HUMIDIFIER
It improves air quality and ensures a healthier environment. Just add a few drops of your favorite essence to scent the whole house.
HEAT EVEN WITHOUT ELECTRICITY
Heat even in the event of a power outage. The innovative heat exchanger absorbs the energy of combustion to continue heating the house naturally.
FORCED AIR OR NATURAL AIR CIRCULATION
At the upper part of the top, heat is directed to the front for better distribution. Two solutions: a rapid forced-air heating system with fan or a natural radiant heating system.
FIREFLECTOR AND REFRACTORY COMBUSTION CHAMBER
It allows for high temperatures such that the combustion process is optimized and emissions are reduced, with high mechanical strength performance.
HYDRAULIC KIT
Factory fitted and tested.
ELECTRONIC CONTROL UNIT
Controls air ventilation.
OUTLET
SMOKE OUTLET
All Jolly Mec products are supplied with a smoke outlet kit already fitted for simplified installation. Depending on the chosen product and the different living solutions, the most suitable smoke outlet can be used.
UPPER SMOKE OUTLET
The upper flue outlet is located on the top of the product rather than at the back. It connects to an upper flue which reduces the depth of the product and consequently maximizes living space.
REAR FLUE OUTLET
Installation with rear flue outlet is done from the back of the product and allows installation without the view of the flue pipe inside the room.
COAXIAL SMOKE OUTLET
Installation with coaxial flue is ideal for passive and low-energy buildings. Combustion air and flue gases are introduced separately in a single duct, avoiding an air inlet in the wall.
CERTIFICATIONS
OIAT
Swiss anti-pollution certification.
ENERGY CLASS A+
Energy Efficiency Class. * On a scale of G to A++.
BIMSCHV
Jolly mec products meet the requirements of the german bimschv2 standard.
4 STARS
Decree issued by the Italian Ministry for the Environment for the certification in quality classes of biomass heat generators. Environmental certification of generators fuelled by solid biomass fuels; Decree issued by the Italian Ministry of the Environment 7 November 2017, no. 186.
ECODESIGN 22
All Jolly Mec pellet and wood-burning stoves, fireplaces and inserts are compliant with Regulation 2015/1185 (Ecodesign). Regulation 2015/1185 introduces specific design criteria and will come in force since 1 January 2022.
EN 13229
European Standard specifying requirements for the design, manufacture, construction, safety and performance (emissions and efficiency), instructions and marking, as well as the relevant test methods for type testing, for inserts and thermo-fired fireplaces fired by solid fuel.