Crosswater Design Single Lever Kitchen Mixer
DESIGN SINGLE LEVER KITCHEN MIXER
DESIGN SINGLE LEVER KITCHEN MIXER
SKU : DE716DC
information
BRAND
Crosswater
PRODUCT TYPE
Kitchen Tap
COLLECTION
Design
PRODUCTION
Made in United Kingdom
WATER PRESSURE
MP
FINISH
- Chrome
- Brushed Stainless Steel
TECHNICAL DRAWING
BARCODE
5055833660100
WEIGHT
1.37 kg
AVAILABLE COLORS
2
GUARANTEE
15 Years
CLEANING
The chrome plate we use on our taps is very durable, nevertheless care should be taken when cleaning. It should be cleaned only with warm soapy water followed by rinsing with clean water and drying with a soft cloth. All finishes are vulnerable to acid attack and some strong substances such as household cleaners, disinfectants, denture cleaners, hair dyes, wine making and photographic chemicals can cause surface to go black or peel.
USE
Kitchen
ENVIRONMENT
Indoor
FINISHES
- Chrome
- Brushed Stainless Steel
INSTALLATION
-First shut off your water heating system, then with your mains stop cock closed, open the lowest cold and hot taps in the house and allow to run until the cold storage tank and pipes are empty (the hot storage cylinder always remains full). -Fitting isolating valve to inlet feeds is recommended for ease of maintenance.
-Screw the flexible hoses into the mixer body and fully hand tighten. Place the O-ring into the groove of base ring, and slide the base ring up to flexible hoses. -Locate the mixer assembly down through the tap hole upon the sink. Slide the mounting seat, rubber washer, metal washer up to the bolt, and secure by screwing the fixing nut finger tight. -Make sure the product is correctly positioned and fully tighten the fixing nut. Connect water supplies with flexible hoses. -Turn the water supplies on and make sure there are no leaks on connection points. -Finally switch on the water heating arrangements.
