Carlisle Whiskey Barrel Flooring
WHISKEY BARREL FLOORING
WHISKEY BARREL FLOORING
As Oak whiskey barrels age and weather, the natural tones of the wood lighten and take on a hint of gray.
INFORMATION
BRAND
Carlisle
PRODUCT TYPE
Flooring
GRADE
Signature
FINISH
Prefinished
LENGTH
2′ – 10′ Random
ENGINEERED WOOD FLOORING
-9-11 Layers-Plywood substrate -Hardwood wear layer dry sawn veneer
-California Air Resource Board (CARB2) compliant -Moisture content of wear layer at time of manufacture may be from 6-9% -Wear layer thickness of 4mm nominal (specified textures and finishing process may slightly alter finished thickness)
WIDTH
7"
EDGE
Softened
PROFILE
Tongue & Groove
USE
Indoor
STRUCTURE
Engineered
TEXTURE
Brushed
SHEEN
Super Matte
ATTIC STOCK
Order quantity requires that 10% above the actual coverage SF be included in the quantity requested.
MINIMUM ORDER
400 SQ FT
SPECIES
White Oak
MANUFACTURING PROCESS
- Product must be made in the USA
- Hot glue process for engineered structure
- Multi-point individual board press laminating process
INSTALLER QUALIFICATION
An experienced installer who has completed wide plank flooring installations with a determined record of successful in-service performance. Our Essentials Collection is available in Engineered structure.
KNOTHOLE FILL
Whiskey Barrel captures this mellowness with soft greige tones accented by light smokey gray around knotholes and pops of darker gray in the knothole fill. Light and versatile, Whiskey Barrel is a wonderful way to add instant character to interior spaces.
SURFACE
Wood subfloors that allow for nailing (at industry prescribed schedule) require at minimum; the use of a caulking gun (such as Wakol MS 265) adhesive bead, applied across the full width of the planks at intervals of 8-12” in addition to mechanical fastening. Full-spread wood flooring adhesive applied by trowel to the substrate surface is recommended and will provide the most optimal method of glue-assist.
DETAIL
-HVAC system must be in place and operational maintaining temperatures between 60-80° degrees F (16-27° C) and relative humidity of 30-55% for at least 14 days prior to the start of acclimation. -Building envelope must be closed in and weather tight, with painting complete except for final coat on trim detail that may impact the flooring installation. All concrete, plaster, tile and other “wet work” has been completed and is no longer contributing moisture to the environment such that the environment is outside normal living conditions. -To the extent that exterior grade may impact the moisture content of the substrate structure all grading should be pitched away from structure and any necessary downspouts and gutters should be installed..
MATERIAL
- American White Oak .
- Super Matte sheen 4-6° .
- NWFA/NOFMA Certified Manufacturer .
- T and G edge joints and end matched .
- 7” wide planks, 2’-10’ random lengths .
- Engineered or Solid Flooring is 5/8” total thickness .
- Flooring available in 6 colors and top coated with a UV cured urethane finishِ 3 Colors are smooth (no texture) and 3 colors are brushed texture & Grade of material is a proprietary grade created by Carlisle. Wood Filler is used in certain characterics within the plank face.
COLORS
ALL COLORS
