Watco Ashalt Paint
ASHALT PAINT
ASHALT PAINT
A solvent-free smooth, matte paint for internal and external asphalt surfaces, even in main traffic areas.
The thick, flexible blacktop coating is easy to apply by brush or roller and is available in a range of attractive colors. Asphalt Paint is ideal for use in warehouses, plant rooms, asphalt walkways on roofs, parking lots, line markings, tennis courts, playgrounds etc.
INFORMATION
FEATURES
- Ready for traffic in 24 hours
- Flexible, waterproof membrane
- Can be applied to damp surfaces
- Suitable for light to medium traffic
- Solvent-free, virtually odorless asphalt paint
- Unique formulation gives excellent resistance to UV and weathering
- For use on asphalt, concrete, brick, masonry and similar porous surfaces
- Covers approximately 160 - 240 sq. ft. per gallon; one coat covers most surfaces
BRAND
Watco
PRODUCT TYPE
Paint
DOWNLOADS
↓ TDS Asphalt Paint.pdf
↓ SDS B230828 Asphalt Paint Tile Red.pdf
↓ SDS B230230 asphalt-paint-black.pdf
↓ SDS B230429 asphalt-paint-navy-gray.pdf
↓ SDS B2309155 asphalt-paint-mid-blue.pdf
↓ SDS B231431 TE ASPHALT PAINT 1.3 GAL YELLOW.pdf
AVAILABLE COLORS
5
FINISH
Matte, Smooth
SUITABLE FOR
Asphalt, concrete, brick, masonry, and similar porous surfaces
POT LIFE
25 minutes at 70°F
SKU
B231431
USAGE INTERIOR/EXTERIOR
Interior
CURING TIME (HOURS)
24 Hours in 70°F
PRODUCTION
Made in United States
RECOMMENDED NUMBER OF COATS
1
HOW TO APPLY
CLEAN-UP
Clean application tools in warm soapy water before the product has started to cure.
CURING TIME
The product will cure in 24 hours for light traffic; allow 48 hours before bringing the area back into full service. Cold, damp or humid weather will delay curing.
COVERAGE
One gallon will typically cover 160-240 sq ft with one coat.
APPLICATION
Apply Asphalt Paint by brush, 3/8" nap roller or with our 18" roller frame and handle. One coat is generally sufficient although a second coat may be required on very porous or very rough surfaces. Avoid applying too thickly. Do not apply externally if rain or frost is forecasted or if the temperature is below 50°F. In extreme temperature conditions, please contact a Watco Industrial Flooring Expert at (855) 627-6350.
SURFACE PREPARATION
Ensure the surface is clean, sound and dry (slightly damp is acceptable), using a solvent free degreaser which can be used on asphalt and similar surfaces. Asphalt Paint can be applied to existing paint providing all poorly bonded material is removed and glossy surfaces are dulled by scuff-sanding with abrasive paper.
