Watco Floors Asphalt Repair Patch
ASPHALT REPAIR PATCH
ASPHALT REPAIR PATCH
Pothole repair made easy! Asphalt Repair Patch is a high quality, durable epoxy resin formula, suitable for use on both concrete and asphalt pavements, roadways & sidewalks.
Repairs can be open to traffic immediately after it has been compacted and can be applied regardless of the weather outside.
INFORMATION
BRAND
Watco Floor
PRODUCT TYPE
Paint
APPLICATION
Can be driven over immediately after application
COVERAGE
6 sq. ft. per 60lb. at 2" thick
USAGE INTERIOR/EXTERIOR
Exterior
CURING TIME
Immediate, following compacting of material
SKU
A130220
PRODUCTION
Made in United States
MAXIMUM OPERATIONAL TEMPERATURE
110°F
SUITABLE FOR
Exterior potholed asphalt and concrete
APPLICATION
No heating or mixing is required. Simply shovel into the pothole, crack, or rut, straight from the container. If the fault is especially deep, i.e. over six inches, apply in two-inch layers, compacting each layer in succession. Shovel enough material into the fault to slightly crown the patch. When completed, tightly compress the patch into the hole. The area can be opened to traffic immediately.
SURFACE PREPARATION
Simply sweep out the area to be repaired with a bristled brush or broom. It is a good idea to remove any loose debris, dirt, ice, or standing water from the area to be repaired. This action will promote good adhesion and bonding.
PROPERTIES
Easy to use material for repairing holes, trafficked by cars or HGVs immediately, no mixing required, pack includes primer.
DETAIL
This two-part, rapid-cure epoxy resin is easily mixed and stays workable for two hours; giving you time to coat awkwardly sized areas or brush neat edges.
EASILY POURS
Easily pours from the pack
MIXING REQUIRED
Simple to use - no mixing required
STRONGER REPAIR
Contains a mix of aggregates for a stronger repair.
