Watco Concrete Floor Paint
CONCRETE FLOOR PAINT
CONCRETE FLOOR PAINT
Our industrial strength Concrete Floor Paint is a single component, urethane modified acrylic coating designed to be an economical way to brighten dull or stained concrete.
This extra strength polyurethane formula is recommended as interior concrete floor paint for areas with heavy foot traffic and lightweight rubber-wheeled pallet trucks.
Excellent for general purpose use in factories, showrooms, offices, schools and workshops where the easy removal of dust, dirt, oil and grease is needed.
Not only for the indoors, it can also be used as exterior concrete floor paint for surfaces like concrete decks, walkways, curbs, and parking areas.
This fast-dry, water based coating requires only minimal surface preparation, offers low odor application, and soap & water clean up.
INFORMATION
FEATURES
- Two coats required
- Hard-wearing & oil-resistant
- Low sheen finish reduces reflection & glare
- Easy to apply, fast drying & virtually odorless
- Dust-proofs concrete and makes it easier to clean
- Ready to recoat in 4-6 hr., Ready for light traffic in 24 hr.
- If painting new or bare concrete, prepare using Cemtetch® Self Etching Cleaner
BRAND
Watco
PRODUCT TYPE
Paint
NUMBER OF COATS
2
APPEARANCE
Low Sheen
USAGE INTERIOR/EXTERIOR
Interior
SUITABLE FOR
Concrete, wood, most metals, existing well bonded paint. The moisture content of concrete should be less than 75% RH
SHELF LIFE
12 months in unopened containers
SKU
B160138
COLLECTION
Concreate
COVERAGE
170 to 270 sq. ft. per gallon
PRODUCTION
Made in United States
HOW TO APPLY
COVERAGE
Coverage will vary with the porosity and the degree of surface profile of the concrete. For the purpose of estimating coverage, typically one coating should have a coverage rate of 170-270 sq. ft. per gallon.
CURING TIME
Tack free dry time: 1-2 hours. Dry to recoat: 4-6 hours. Light foot traffic: 24 hours. Full use: 72 hours. Allow coated floor to cure 7 days before mopping or washing. Use an anti-skid floor coating additive for skid resistance where oil or water spillage is a problem.
MIXING
Use a paint paddle or power mixer to mix the material thoroughly until an even, uniform color is achieved. Be sure there is no unmixed material on the bottom of the container.
APPLICATION
Apply only when air and surface temperatures are between 50 - 90°F (10-32°C), surface is at least 5°F above the dew point and relative humidity is below 85% during and after application. Apply by roller using a good quality 3/8" synthetic nap cover. Avoid applying excessive material. Do not allow the coating to puddle. Recommended dry film thickness is 1½-2½ mils. On new or uncoated concrete, two coats of product should be applied.
SURFACE PREPARATION
The concrete surface must be clean, dry and free of loose material. New concrete should be allowed to cure for 28 days prior to coating. Remove oil, dirt, grease and other chemical contaminants by cleaning with detergent or other suitable cleaner. Rinse thoroughly. Use Cemtetch® Self Etching Cleaner to remove unsound laitance and create a proper surface profile to the concrete. Rinse thoroughly and allow to dry before application of the Concrete Floor Paint.
