Watco Epoxicote High Build Standard Coating
EPOXICOTE HIGH BUILD STANDARD COATING
EPOXICOTE HIGH BUILD STANDARD COATING
Epoxicote High Build is our popular range of heavy-duty floor paint.
It delivers an ultra-hard wearing chemical resistant, gloss floor coating. This one coat, high build coating offers superior protection for you concrete floors.
INFORMATION
FEATURES
- Gloss finish
- Easy to clean surface
- 100% solids epoxy resin formula
- Non-tainting and virtually solvent-free
- High-build application gives excellent wear resistance
- Protects the concrete from oil and chemical contamination
BRAND
Watco
PRODUCT TYPE
Paint
DOWNLOADS
↓ Epoxicote-high-build-black.pdf
↓ Epoxicote-high-build-Standard.pdf
↓ Epoxicote-high-build-Mid Blue Kit.pdf
↓ Epoxicote-high-build-Tile Red Kit.pdf
↓ Epoxicote-high-build-Dark Grey Kit.pdf
↓ Epoxicote-high-build-Navy Grey Kit.pdf
↓ Epoxicote-high-build-Silver Grey Kit.pdf
↓ Epoxicote-high-build-Mid Green Kit.pdf
↓ Epoxicote-high-build-Safety Yellow Kit.pdf
AVAILABLE COLORS
8
FINISH
Glossy,Smooth
USAGE INTERIOR/EXTERIOR
Interior
POT LIFE
25 minutes at 70°F
CURING TIME (HOURS)
At 70°F 12-16 hour for light foot traffic, 24 for normal traffic, 36 to 48 hours for vehicle traffic
SUITABLE FOR
Concrete, well bonded paint, wood, some metals
RECOMMENDED NUMBER OF COATS
One is usually sufficient
COVERAGE
Approx. 190 Sq Ft Per 1.05 Gallon Kit
PRODUCTION
Made in United States
SKU
B10615107
COLLECTION
High Build
PRIMER REQUIRED
Yes, on bare concrete and very porous surfaces should be primed with 4 Hour Epoxy Primer
HOW TO APPLY
MIXING
Each Epoxicote High Build kit consists of a container of curing agent and a container of resin. The curing agent and resin must be thoroughly mixed together with a paint mixer attached to an electric drill for 2 to 3 minutes until an even color is obtained. Do not mix more than one unit at a time.
PREPARATION: STEEL
Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Grease or oil should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.
APPLICATION
Epoxicote High Build: Best results are obtained in warm conditions (minimum 60°F). On horizontal surfaces apply by medium pile type roller (not foam) in one coat.
PREPARATION: CONCRETE AND BRICK
Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, or contamination All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surface should preferably be abraded to improve adhesion.
