Watco Concrex Fine Filler Patch & Repair
CONCREX FINE FILLER PATCH & REPAIR
CONCREX FINE FILLER PATCH & REPAIR
Concrex® Fine Filler repairs minor imperfections in floors before painting.
Concrex Fine Filler is extremely strong and economical to use - mix only what you need. Paint the finished repair with any coating or leave it as-is.
INFORMATION
PROPERTIES
Non shrink, two part liquid epoxy, can be coated, fast curing, ideal for cracks up to 2-3mm wide, its liquid formulation ensures that no sanding down will be needed to make it level once cured.
BRAND
Watco Floor
PRODUCT TYPE
Patch & Repair
FEATURES AND BENEFITS OF CONCREX® FINE FILLER
- Suitable For Concrete And Metal
- Resistant to most industrial chemicals
- Easy to mix 50:50 ratio by weight or by volume
- For use on interior and exterior substrates
- A 3 lb. kit makes approximately 2 pints of filler
- Ideal for repairing scratches, holes, gaps, cracks and pitted floors or vertical surfaces
SUITABLE FOR
- Metal
- Cement
- Concrete
COLLECTION
Concrex
SKU
A090014
USAGE INTERIOR/EXTERIOR
- Interior
- Exterior
CURING TIME (HOURS)
3 to 6 hours at 60-70°F
COVERAGE
3 Lb. Kit Produces 2 Pints Of Filler
PRODUCTION
Made in United States
APPLICATION
Using the plastic scraper provided, press the mixed components into the repair and smooth off the surface. Any spillages should be scraped away or wiped off with a dry cloth. The finished repair may be filed, sawn or drilled. Take care not to inhale the dust from these operations. Finished, hardened repairs may be painted after 12 hours/overnight curing and light sanding.
SURFACE PREPARATION
Surfaces must be sound, clean and free from dust, oil, grease or other contaminants. Some surface dampness can be tolerated, but surfaces should not be wet.
POT LIFE
15 - 20 Minutes
READY FOR USE IN
3 - 6 hours
MIXING
Wear the gloves provided in the pack. Mix ratio: 1:1 by weight or volume. Using the mixing sticks provided, take equal sized portions of the resin (off white), and curing agent (black), and mix them together thoroughly on a suitable mixing board until they are a uniform gray color. Try to be as accurate as possible in estimating equal quantities, but there is no need to weigh or measure them. Pot life is approximately 15-20 minutes. Make sure not to mix more filler than can be applied in this time limit.
