Vahallan Hand Printed Wallcovering
HAND PRINTED WALLCOVERING
HAND PRINTED WALLCOVERING
The Cortica Pattern is a fusion of machine and nature. Metallic leaf hugs a porous surface and shares space with dark shallow caverns as this textured wallpaper adds depth and richness to a space.
INFORMATION
INSTALLATION GUIDE FOR TILES
At Vahallan, we are meticulous about each hand-painted wall covering we create for our customers. Every order is crafted by our artists to give your space the personalized look and feel you’re seeking.
BRAND
Vahallan
PRODUCT TYPE
Wallcovering
FIRE RATING
ASTM Class B
COLLECTION
Hand Printed
TILE SIZE
- Square : 17.5"x 17.5"
- Rectangles : 17.5"x 35"
REPEAT AND MATCH
No Repeat. Random pattern match.
CLEANING & CARE
-Avoid getting the wall covering excessively wet. -Most stains will wipe clean with water and a soft cloth. -Do not use cleaners, solvents, or chemicals on any kind on Vahallan wall coverings. -Before cleaning any product, we recommend testing it on a small, inconspicuous area.
PRODUCTION
Made in United States
DOWNLOAD
↓ Installation Instructions
COLORS
PRE-INSTALLATION GUIDELINES
-The panels should be viewed and approved by client before installation. Confirm that you have the correct quantity and color of product. No claims will be allowed if more than 3 panels have been installed. All claims must be made within 30 days of ship date. -No claims are allowed for labor charges or consequential damages. No claims are allowed if lighting in install area is unfinished/not fully installed. -Our product is not guaranteed against fading or color changes over time. Prolonged storage is not recommended. -When handling wall coverings, avoid folding or creasing the product. -Store the material in a dry place between 60° - 85°F.
RECOMMENDED TOOLS AND EQUIPMENT
- Table & Level
- Sponge and towels
- Steel straight edge
- Snap-off-blade knife
- Seam roller & Clean water
- Painting supplies for priming
- Romans pro-977 wall covering primer
- Smoothing brush or plastic smoother
- Wall covering primer (Draw tite™ preferred)
- Clear adhesive (Romans 880 or Romans Pro-838 preferred)
USE
Wall
APPLICATION
Tiles
AVAILABLE COLORS
4
APPLICATIONS
STEP 1 : SETUP
Make sure the walls are dirt- and dust-free, and that cracks, nail holes, and loose plaster have been fixed. Remove any electrical outlet plates and vent covers. Walls must be completely dry before install.
STEP 2 : WALL PREPARATION
Walls should be smooth and sanded. Surfaces receiving the wall covering should be primed with two coats of high-quality acrylic primer. Match primer color to paper to minimize visible seams on wall. Read the manufacturer’s label for suggested primer drying time.
STEP 3 : WALL MAPPING
Wall mapping will be determined by the method of installation (Step 5) and the height of the wall. We recommend beginning installation in the approximate center of the wall.
STEP 4 : ADHESIVE APPLICATION
Apply adhesive to the back of your prepared piece using a paint roller. It is important that the application is even and adequate, particularly at the edges. To ensure proper adhesion, book or allow paper to relax for 30-90 seconds after applying adhesive. On heavily textured or porous surfaced papers, avoid getting adhesive on the face of the wall covering as it could stain the papers. It may be necessary on heavily textured wallpapers to put adhesive on both the wall and back of paper.
STEP 5 : PAPER APPLICATION
Some patterns will have indicators written on the back of each panel. If your panels have “T” written - this is the top of the wall covering. If your panels have numbers written, reference the numerical guide included in your package. When you are confident of your measurement, start by applying the panel to the wall along the vertical line and smoothing it to remove the wrinkles and air bubbles. A plastic scraper or brush will be required. Line up the edge of the next piece and apply. Match pattern panel to panel. A seam roller may be necessary to remove a raised seam. Trim the ceiling and floor edges of the wallpaper after application. Wipe down the paper with a clean, damp towel or sponge to remove any paste on the surface. Let cure for 24 hours before hanging anything on top of paper.
