Carlisle Argil Flooring
ARGIL FLOORING
ARGIL FLOORING
Argil is a timeless color with the flexibility to be used in a variety of design themes. This unique pastel tone was created by mixing hints of brown with touches of gray making the wood appear aged without looking old.
INFORMATION
BRAND
Carlisle
PRODUCT TYPE
Flooring
LENGTH
2' - 12' Random
WIDTH
4" - 10"
EDGE
Tongue & Groove Softened Edge
ENGINEERED WOOD FLOORING
-9-11 Layers-Plywood substrate -Hardwood wear layer dry sawn veneer -California Air Resource Board (CARB2) compliant -Moisture content of wear layer at time of manufacture may be from 6-9% -Wear layer thickness of 4mm nominal (specified textures and finishing process may slightly alter finished thickness)
AVAILABLE COLORS
6
USE
Indoor
SURFACE
Wood subfloors that allow for nailing (at industry prescribed schedule) require at minimum; the use of a caulking gun (such as Wakol MS 265) adhesive bead, applied across the full width of the planks at intervals of 8-12” in addition to mechanical fastening. Full-spread wood flooring adhesive applied by trowel to the substrate surface is recommended and will provide the most optimal method of glue-assist.
SHEEN
Extra Matte
STRUCTURE
Solid or Engineered
GRADE
- Original
- Heirloom
- Signature
BEAUTIFUL
This subtle overlay adds just a tint of color to the whiter sapwood lending a slightly more even tone to the standard heart and sapwood contrast. You will look at it and be unsure of what to call it and that is why it is so beautiful.
SPECIES
Hickory
MINIMUM ORDER
800 SQ FT
MANUFACTURING PROCESS
- Product must be made in the USA
- Hot glue process for engineered structure
- Multi-point individual board press laminating process
SOLID WOOD FLOORING
- Moisture content should be in the 6-9% range
- Milling tolerance must meet or exceed NWFA Standards
- Relief grooves 3/8” deep, every ¾” across the bottom of the planks
INSTALLATION
Immediately following installation of the flooring materials, the woods surface should be thoroughly cleaned and appropriately protected to avoid damage to the flooring as other construction trades complete their responsibilities.
TEXTURE
- Smooth
- Timeworn
- Brushed
- Footworn
- Hand Scraped Edge
STRUCTURE
Solid or Engineered
PROFILE
3/4", tongue and groove edge
DETAIL
-Flooring should be installed in the direction recommended by the Architect or Designer or parallel to the longest wall. -Expansion space of at least ½” is required around the perimeter of the installation in each room. -Installation using full-spread glue requires the of use appropriate surface weight to properly set the individual board into the adhesive. Adhesive transfer of 95% or more to the bottom of the plank is required and must retain contact with the adhesive and substrate once dry and cured. 5 gallon buckets filled with sand or water are most commonly used for this purpose. Depending on adhesive requirement weights can typically be redistributed after 20 minutes.
MATERIAL
- Hickory
- Extra Matte sheen 6-9°
- T and G edge joints and end matched
- NWFA/NOFMA Certified Manufacturer
- 8” wide planks, 2’-12’ lengths with 6’-7’ average
- Softened edge on the 2 long sides of each plank of 1/32” - ends are not ease
- Grade of material is a proprietary grade created by Carlisle. Wood Filler not allowed on the surface of the planks.
COLORS
ALL COLORS
