Watco Quickfloor 15 Minute Concrete Repair
QUICKFLOOR 15 MINUTE CONCRETE REPAIR
QUICKFLOOR 15 MINUTE CONCRETE REPAIR
QuickFloor® 15 Minute Concrete Repair Patch is a 2-part mix that quickly pours out as a black liquid and cures as a grey solid. The combined polyurea chemistry allows for foot traffic in just 15 minutes at 70°F.
A fully cured QuickFloor® 15 Minute Concrete Patch is stronger than concrete or asphalt repaired and can be applied at temperatures as low as 5°F, making it perfect for commercial freezers. Apply patch to a clean surface by simply combining equal parts of the mix. The bond will adhere to a variety of substrates: concrete, wood, asphalt and fiberglass.
INFORMATION
FEATURES
-Virtually VOC-free
- Only sold in Concrete Gray color.
- Can be applied indoors or outdoors.
- Returned to service immediately after cure.
- Extremely fast cure time (5-25 minutes) depending on temperature applied at.
PRODUCT TYPE
Mortar Repair
VOLATILE ORGANIC COMPOUNDS
<50 g/l
BRAND
Watco
VOLATILE ORGANIC COMPOUNDS
<10 g/l
SUITABLE FOR
Concrete, wood, fiberglass, and asphalt
COLLECTION
Quickfloor
PRODUCTION
Made in United States
PRACTICAL COVERAGE
200 linear feet at ¼" wide by ¼" deep crack
PERFORMANCE CHARACTERISTICS
- Elongation (ASTM D412) 6-8%
- Tensile Strength (ASTM D412) 4,800
- Hardness, Durometer (ASTM D2240) 67-72 D
- Compressive Strength (ASTM C109) 5,600 ; With silica sand added 6,200
- Abrasion Resistance (ASTM D4060) CS-17 Wheel, 1,000 g load, 1,000 cycles 20.
SKU
A803642
USAGE INTERIOR/EXTERIOR
Interior or Exterior
CURING TIME (HOURS)
15 Minutes in 70°F
STORAGE
Cool Dry Place
POT LIFE
None. Pour out all material immediately after mixing components together.
FOOD INDUSTRY REPAIRS
Perfect for food industry repairs, as it cures non-porous and will not let bacteria, mold or pathogens bond to its surface
DETAIL
Depths of 1/16in to 3in are easily filled without the use of sand or pea gravel as filler. This is to be used in non-moving joints only.
SHELF LIFE
2 years
FLASHPOINT
141°F (61°C)
HOW TO APPLY
MIXING
Pour out equal volumes of each component prior to combining. Combine and stir together with wooden stick for 20-30 seconds. QuickFloor 15 Minute Concrete Patch cures extremely quick do not mix large amounts that cannot be used within two minutes prior to combining. Once mixed QuickFloor 15 Minute Concrete Patch is an easy flowing liquid.
APPLICATION
QuickFloor 15 Minute Concrete Patch is suitable for applications at 5°F. Within one minute of mixing, pour concrete patch into the crack to be filled. Fill the crack to a slight excess and allow curing. The liquid will pour black in color and change to a gray color as it begins to cure. This will take 10-15 minutes at 70°F to fully cure. Once the QuickFloor 15 Minute Concrete Patch is completely gray in color, an excess material on the surface can be removed by grinding to a flush, even surface.
SURFACE PREPARATION
Remove all dirt, grease, oil and other contaminants by washing surface with cleaner, degreaser or other suitable cleaner. Rinse thoroughly with fresh, clean water. Remove all loose, unsound, or deteriorated concrete. Small hairline cracks must be chased using a v-shape diamond crack blade or hand held grinder.
The crack should be open to a minimum of ¼ inch wide. Any contaminants that may have seeped into the crack after grinding must be cleaned out again. Use dry silica sand to fill deep cracks insuring ¼ inch down from surface. The QuickFloor 15 Minute Concrete Patch will soak into the sand and fortify the patch.
