Carlisle Valley Fog Flooring
VALLEY FOG FLOORING
VALLEY FOG FLOORING
The morning fog in New England shrouds the landscape in a palette of soft, smoky grays. Rays of sun may start to creep through some areas while others remain in the shadows.
INFORMATION
ENGINEERED WOOD FLOORING
-9-11 Layers-Plywood substrate -Hardwood wear layer dry sawn veneer
-California Air Resource Board (CARB2) compliant -Moisture content of wear layer at time of manufacture may be from 6-9% -Wear layer thickness of 4mm nominal (specified textures and finishing process may slightly alter finished thickness)
BRAND
Carlisle
GRADE
Heirloom
WIDTH
4" - 10"
EDGE
Softened
PRODUCT TYPE
Flooring
LENGTH
2' - 12' Random
INSTALLATION
- Plywood
- Waterfront
- Residential
- Commercial
- Radiant Heat
- Concrete Slab
TEXTURE
Smooth
SHEEN
Super Matte
MINIMUM ORDER
800 SQ FT
FINISH
Prefinished
PRODUCTION
Made in United States
PROFILE
3/4", Tongue And Groove Edge
SPECIES
Rift & Quartersawn White Oak
USE
Indoor
STRUCTURE
Solid or Engineered
SURFACE
Wood subfloors that allow for nailing (at industry prescribed schedule) require at minimum; the use of a caulking gun (such as Wakol MS 265) adhesive bead, applied across the full width of the planks at intervals of 8-12” in addition to mechanical fastening. Full-spread wood flooring adhesive applied by trowel to the substrate surface is recommended and will provide the most optimal method of glue-assist.
INSPIRED
Valley Fog was inspired by these evocative mornings, shifting color depending on the quality of light and the grain patterns in the Rift and Quartersawn White Oak.
MANUFACTURING PROCESS
- Product must be made in the USA
- Hot glue process for engineered structure
- Multi-point individual board press laminating process
INSTALLER QUALIFICATION
An experienced installer who has completed wide plank flooring installations with a determined record of successful in-service performance. Our Essentials Collection is available in Engineered structure.
ATTIC STOCK
-Order quantity requires that 10% above the actual coverage SF be included in the quantity requested. -It is recommended that an additional 5% be added to the order to provide the customer with attic stock for future unexpected repairs
DETAIL
-HVAC system must be in place and operational maintaining temperatures between 60-80° degrees F (16-27° C) and relative humidity of 30-55% for at least 14 days prior to the start of acclimation. -Building envelope must be closed in and weather tight, with painting complete except for final coat on trim detail that may impact the flooring installation. All concrete, plaster, tile and other “wet work” has been completed and is no longer contributing moisture to the environment such that the environment is outside normal living conditions. -To the extent that exterior grade may impact the moisture content of the substrate structure all grading should be pitched away from structure and any necessary downspouts and gutters should be installed..
MATERIAL
- Rift & Quartersawn White Oak
- Naturals / Super Matte sheen 2-4°
- NWFA/NOFMA Certified Manufacturer
- T and G edge joints and end matched
- 8” wide planks, 2’-12’ lengths with 6’-7’ average
- Engineered or Solid Flooring is 3/4” total thickness
- Flooring available in 8 colors and top coated with a UV cured oil.
- Softened edge on the 2 long sides of each plank of 1/32”- ENDS ARE NOT EASED
- Grade of material is a proprietary grade created by Carlisle. Wood Filler not allowed on the surface of the planks.
COLORS
ALL COLORS
