Carlisle Leather Wide Plank Flooring
LEATHER WIDE PLANK FLOORING
LEATHER WIDE PLANK FLOORING
Imagine sinking into a deep leather chair in a private study lined with custom cabinetry and old books. Leather brings that same feel of heritage to your floor.
INFORMATION
BRAND
Carlisle
PRODUCT TYPE
Flooring
GRADE
Heirloom
LENGTH
2′ – 10′ Random
ENGINEERED WOOD FLOORING
-9-11 Layers-Plywood substrate -Hardwood wear layer dry sawn veneer -California Air Resource Board (CARB2) compliant -Moisture content of wear layer at time of manufacture may be from 6-9% -Wear layer thickness of 4mm nominal (specified textures and finishing process may slightly alter finished thickness)
WIDTH
6"
EDGE
Softened
STRUCTURE
Engineered
USE
Indoor
PROFILE
Tongue & Groove
TEXTURE
Smooth
SHEEN
Extra Matte
REMINISCENT
A rich, brown finish reminiscent of old timbers conveys a feeling of solidness and strength.
SPECIES
White Oak
MINIMUM ORDER
400 SQ FT
MANUFACTURING PROCESS
- Product must be made in the USA
- Hot glue process for engineered structure
- Multi-point individual board press laminating process
INSTALLER QUALIFICATION
An experienced installer who has completed wide plank flooring installations with a determined record of successful in-service performance. Our Essentials Collection is available in Engineered structure.
ATTIC STOCK
-Order quantity requires that 10% above the actual coverage SF be included in the quantity requested. -It is recommended that an additional 5% be added to the order to provide the customer with attic stock for future unexpected repairs
SURFACE
Wood subfloors that allow for nailing (at industry prescribed schedule) require at minimum; the use of a caulking gun (such as Wakol MS 265) adhesive bead, applied across the full width of the planks at intervals of 8-12” in addition to mechanical fastening. Full-spread wood flooring adhesive applied by trowel to the substrate surface is recommended and will provide the most optimal method of glue-assist.
DETAIL
-HVAC system must be in place and operational maintaining temperatures between 60-80° degrees F (16-27° C) and relative humidity of 30-55% for at least 14 days prior to the start of acclimation. -Building envelope must be closed in and weather tight, with painting complete except for final coat on trim detail that may impact the flooring installation. All concrete, plaster, tile and other “wet work” has been completed and is no longer contributing moisture to the environment such that the environment is outside normal living conditions. -To the extent that exterior grade may impact the moisture content of the substrate structure all grading should be pitched away from structure and any necessary downspouts and gutters should be installed..
MATERIAL
- White Oak
- Extra Matte sheen 6-9°
- 6" wide planks, 2’-10’ lengths
- Engineered flooring is 5/8” total thickness
- NWFA/NOFMA Certified Manufacturer
- Softened edge on the 2 long sides of each plank of 1/32” - ENDS ARE NOT EASED
- Flooring available in 8 colors and top coated with a UV cured urethane finish.
- Grade of material is a proprietary grade created by Carlisle. Wood Filler not allowed on the surface of the planks.
COLORS
ALL COLORS
