EZ Access Traverse™ Curb Plate (Home Collection)
TRAVERSE™ CURB PLATE
TRAVERSE™ CURB PLATE
Make yard and garden work a breeze with the traverse™ curb plate. This sturdy, single-piece plate is designed to help you conquer raised paths and landings up to 5.75" high. The plate boasts an applied surface, ensuring a non-slip experience.
With its built-in handle, carrying it around is a breeze. No need for assembly - simply set it up and start using it! Plus, it's conveniently stored in your shed. Get ready to tackle your outdoor tasks like a pro with the traverse curb plate!
INFORMATION
RODUCTION
Made in USA
BRAND
Bruno
PRODUCT TYPE
Ramp
COLLECTION
Traverse™
LONG UPPER TRANSITION
Extended upper transition allows for additional security and a smooth transition.
WEIGHT
15 lbs.
WARRANTY
3-Year
DIMENSIONS
- Overall Length : 27"
- Overall Width : 27.36"
- Overall Height : 3.182"
- Usable Width : 26.5"
OVERALL TOP TRANSITION
- Width : 26.50”
- Length : 5.00”
RATED LOAD
1000 lbs.
MODEL
TRAVERSE CP27
ANGLE STOP
- Height : 1.5”
- Width : 3.125” (x2)
SAFETY & CONVENIENCE
Tabs underneath allow for proper alignment and prevent sliding, helping to ensure the Curb Plate will stay in place while in use. The built-in handle allows for easy carrying and placement.
SIDE RAIL HEIGHT (INSIDE)
1.5”
SIDE RAIL THICKNESS
.25”
DOWNLOADS
↓ Warranty
↓ Data Sheet
↓ Instructions
STORAGE
Curb Plate may be stored on its side or in any way that does not cause damage to the Curb Plate or property, or create a potentially dangerous situation.
INSTALLATION
-Read and follow all labels, instructions, and warnings prior to use. For additional safety information, or to obtain a copy of labels. -Use hand hold to transport and place Curb Plate; use caution to avoid injuring fingers when placing or removing Curb Plate. Do not let feet or loads fall into, or otherwise become unstabilized by the hand hold. -Position top lip transition securely on support surface, ensure angle stops fully engage curb before and during use.
-Place the Curb Plate’s top lip transition on upper support surface. Ensure that top lip transition fully overlaps the supporting surface and that the Curb Plate is perpendicular (90°) to the edge of the support surface. If obstructions prevent the top lip transition from fully overlapping or being placed at 90° from support surface, reposition Curb Plate as required. -Keep Curb Plate surface clean and free of debris. Clean oil or grease off of Curb Plate immediately with mild detergent and warm water (avoid alkaline cleaners).