Carlisle Pewter Flooring
Pewter Flooring
PEWTER FLOORING
INFORMATION
BRAND
Carlisle
PRODUCT TYPE
Flooring
LENGTH
2' - 12' Random
WIDTH
6"
INSTALLATION
- Plywood
- Residential
- Commercial
- Radiant Heat
- Concrete Slab
- Waterfront
ENGINEERED WOOD FLOORING
-9-11 Layers-Plywood substrate -Hardwood wear layer dry sawn veneer -California Air Resource Board (CARB2) compliant -Moisture content of wear layer at time of manufacture may be from 6-9% -Wear layer thickness of 4mm nominal (specified textures and finishing process may slightly alter finished thickness)
SPECIES
White Oak
EDGE
Softened
TEXTURE
Smooth
SHEEN
Extra Matte
PROFILE
- Tongue
- Groove
GRADE
- Heirloom
- Signature
SPECIES
White Oak
MINIMUM ORDER
800 SQ FT
MANUFACTURING PROCESS
- Product must be made in the USA
- Hot glue process for engineered structure
- Multi-point individual board press laminating process
MATERIALS
-White Oak -6" wide planks, 2’-10’ lengths -T and G edge joints and end matched -Engineered flooring is 5/8” total thickness -Softened edge on the 2 long sides of each plank of 1/32” -Ends Are Not Eased -Flooring available in 8 colors and top coated with a UVcured urethane finish
ATTIC STOCK
-Order quantity requires that 10% above the actual coverage SF be included in the quantity requested -It is recommended that an additional 5% be added to the order to provide the customer with attic stock for future unexpected repairs
SUBFLOOR REQUIREMENTS
-Subfloor must be flat. Level and flat to within 3/16” in 10’. Check with your installer with regard to specific require- ments that intended underlayment and/or adhesives may require that are different than this specification. -Floor must have all loose debris, paint, drywall material or other material removed that may impact appropriate adhesion of the flooring material to the substrate structure
-Concrete substrates must be dry. Dry- ness of substrate must be measured and documented (photographed), and dated using appropriate testing meth- ods. Relative Humidity testing (ASTM F2170) must not exceed 75%. Calcium Chloride testing (ASTM F1869) must not exceed 3lbs of moisture emission per 1000sf over a 24 hour period. -Wood subfloors are not to exceed 12% and should be within 2% of the mois-ture content of the flooring material prior to starting installation, when sam- pled using an appropriate resistance (pin-type) meter.
COLORS
ALL COLORS
