Perma Tone Antique Paint
ANTIQUE PAINT
ANTIQUE PAINT
A decorative pearlescent shimmer glaze, Riflexi is unsurpassed in dramatic appeal. Its rich appearance is formulated with acrylic resins, metallic and pearlescent pigments, mineral fillers, and chemical additive that enhance the coating’s performance.
INFORMATION
RECOMMENDED USE
Interior and exterior commercial, hospital- ity, military, educational and residential wall applications.The luminous properties of Riflexi make it a stunning choice for elegant and luxurious wall spaces, enriching surfaces with its dramatic and unique metallic appearance. While Riflexi can be applied to most any surface, it is most effective when combined with other PermaTone products.
BRAND
Perma Tone
PRODUCT TYPE
Paint
APPLICATION INSTRUCTIONS
Walls must be prepared to be paint ready. Surfaces must be clean, dry and free of dust, grease or other materials that may affect bondig.
COVERAGE
Each gallon provides approximately 300 ft2 to 500 ft2 of coverage depending on the technique of application. Variances in substrate and application technique will affect coverage. Each 5 gallon pail provides approximately 1300 to 2500 ft 2 of coverage. Variations in substrate conditions and applicator tech- nique and skill level will affect coverage
REDUCTION
For application other than spatula, RIFLEXI can be diluted with water, not to exceed 10% dilution by volume.
WARRANTY
Riflexi Is Conditionally Warranted For 10 Years Against Delamination And Color Fading. For Complete Information, Consult Permatone’ S Long Form Specifications And Product Warranties. This Warranty Does Not Apply To Any Party Constituting A “consumer” For Purposes Of The Magnuson-moss Warranty Act. All Other Warranties, Whether Expressed Or Implied,including Without Limitation Any Warranty Ofmerchantability Or Fitness For Purpose Areexpressly Disclaimed.
COLLECTION
Antique
PRODUCTION
United States
SUGGESTED APPLICATION
Using a stainless steel trowel or spatula, apply the RIFLEXI over the surface as Quarztsilco, Palladio, Marmolino, Tevere or any other Permatone finish using airless or small strokes with irregular pattern. Avoid any material build up. (Pattern with sponge or cloth) Apply the RIFLEXI evenly with a sponge or cloth creating the desired pattern and texture. Clean the sponge or cloth regularly to avoid wet material build up on the wall. Create your own designs by experimenting withdifferent tools and techniques.
STORAGE
Store RIFLEXI in its original containers at temperatures not less than 40°F (4°c) or greater than 110°F (43°C). Store in covered space, out of direct sunlight. Do not stack pails more than three high.
SURFACE PREPARATION
Surfaces must be clean and dry. When applied over PermaTone textures, consult the application instructions for such textures for drying and curing times.
MAINTENANCE
Surface may be cleaned of minor stains with a damp cotton cloth.
EQUIPMENT
Stainless steel trowel with rounded corners and beveled edges. Texture glove, spatula, plastic trowel, trim guard, spray equipment, cloth, brush, or any other tool useful in producing desired finish Marine sponge; paint roller; cotton towels; chamois or chamois roller; 1/8" nap paint roller or sponge rolle
SHELF LIFE
Approximately six months if stored properly.
MATERIAL PREPARATION
Mix RIFLEXI manually or with a low rpm mixer.
DOWNLOADS
↓ Cleaning, Maintenance & Repair – Quartzsilco
↓ Interior Finish Coatings Testing Summary Chiffo
↓ Chiffon Interior Textured Finishes Voc Statement
↓ Specs: Light Damascus – Quartzsilco & Pintufondo
↓ Cleaning, Maintenance & Repair – Venetian Plasters
↓ Quartzsilco Interior Textured Finishes Voc Statement
↓ Interior Finish Coatings Testing Summary – Quartzsilco, Quartzmural
↓ Manufacturer’s Long Form Specifications Interior Finish Coatings Pf-405n
LIMITATIONS
-For use on interior and exterior wall surfaces only. -Patching limitations standard to applied coatings. -This product requires skilled application. -Surface air and substrate temperatures shall be 60°F to 85°F during application and for a period of 24 hoursthereafter. -Riflexi is not compatible with solvent base products or cleaners. -Use in well ventilated areas. -Protect all adjacent surfaces (door frames, windows, etc.) adequately. -Do not water downmaterial. -Do not apply over quicksetjoint compound. -Always wear appropriate eye andskin protection when using this product. -Harmful if swallowed. -Avoid constant moisture in the wall cavity behind the coating.
PACKAGING
-1 GL pail - 7.4 lbs. net, 8.1 lbs. gross -5 GL pail - 39 lbs.net, 41.8 lbs. gross
PROPERTIES
- Cure: 72 hrs @ 70°F, 50% RH
- Initial Set: 30 min @70°F, 50% RH-
