Behr Premium Advanced Deckover® Paint
BEHR PREMIUM ADVANCED DECKOVER® PAINT
BEHR PREMIUM ADVANCED DECKOVER® PAINT
Extend The Life Of Your Deck
BEHR PREMIUM ADVANCED DECKOVER Coating resurfaces existing wooden decks by filling-in cracks and taming splinters, extending the life of your deck and living space so you can enjoy the outdoors.
information
FINISHES
- Smooth, slip resistant finish
- Textured, slip resistant finish
SIZE
- 8 oz
- 1 Quart
- 1 Gallon
- 5 Gallon
BRAND
Behr
PRODUCT TYPE
Paint
DETAILED APPLICATION TIPS
One gallon of ADVANCED DECKOVER Coating can cover up to 75 Sq. Ft. in 2 Coats. It is strongly recommended to fill cracks, nail holes and accessible board ends prior to applying the first coat.
-Day 1 - prep day : Properly clean the wood or concrete surface according to label instructions. Wait 24 hours for surface to completely dry.
-Day 2 - Application Day : Fill in cracks - Let dry for 4-6 hours, Apply 1st Coat - Let dry for 4-6 hours, Apply 2nd Coat - Let dry for 4-6 hours
USE THE PROPER TOOLS
Best results are achieved when you use the recommended tools.
-No honeycomb rollers -¾″ nap roller can be used but dry time will be longer -Airless sprayer only recommended for experienced users -½″ nap roller is recommended; a brush or ¼″ nap roller can also be used for a smoother finish
PRODUCTION
Made in United States
USE
Outdoor
TIPS FOR ENSURING SUCCESS WITH ADVANCED DECKOVER®
See product label or website for required surface prep and application steps. Proper preparation and application are key to achieving a beautiful deck with long-lasting results. Here are some tips to help you achieve success with your ADVANCED DeckOver project.
A CLEAN AND SOUND SURFACE IS REQUIRED
Your deck surface must be clean and sound. Properly prepare your deck before application.
-Remove dirt, oil, grease, mold/mildew, or any other debris or stain on the surface -Replace rotting or unstable boards -Remove loose wood fibers or wood fuzz -Remove peeling paint/coating -Make sure the deck has been constructed according to standard building codes
FEATURES
Conceals splinters & cracks up to ¼”
COVERS
Covers up to 75 sq. ft. per gallon in 2 coats
ACTIONS THAT CAN ADVERSELY AFFECT ADVANCED DECKOVER COATING PERFORMANCE
The following actions can severely affect the performance of the advanced deckover coating:
-Failing to properly prepare the surface (i.e. Failing to strip away peeling coatings with No. 64 Wood Stain and Finish Stripper and using No. 63 All In One Wood Cleaner to clean the surface) -Not allowing sufficient dry time after preparation -Not allowing sufficient dry time between coats -Not completely filling in cracks with ADVANCED DECKOVER prior to coating -Thinning the ADVANCED DECKOVER product -Applying the product outside of the recommended temperature range -Applying the product on damp/wet surfaces -Skipping instruction steps in the preparation or application process
COLORS
- Taupe
- Slate
- Coffee
- Forest
- Sandal
- Valise
- Pewter
- Sable
- Sea Foam
- Chocolate
- Stonehedge
- Chatham Fog
- California Rustic
- Woodland Green
- Redwood Naturaltone
- Sage
- Russet
- Tile Red
- Pyramid
- Chestnut
- Bordeaux
- Wood Chip
- Dark Walnut
- Barn Red
- Slate Gray
- Drift Gray
- Sagebrush Green
- Castle Gray
- Adobe Brown
- Golden Beige
- Redwood
- Light Lead
- Terra Cotta
- Colony Blue
- Antique Brass
- Woodbridge
- Padre Brown
- Rose Beige
- Boot Hill Grey
- Cape Cod Gray
- Wrangler Brown
- Mountain Spruce
- Cordovan Brown
- Ponderosa Green
- Cedar Na turaltone
APPLY ON THESE RECOMMENDED SURFACES
-Properly prepared wood and composite surfaces (such as decks and railings) -Properly prepared concrete surfaces (such as pool decks and patios) -Properly prepared pressure-treated wood
DO NOT APPLY ON THESE SURFACES
- Drivable surfaces (such as garages and driveways)
- Plywood or compressed wood
- Any architectural plastics (such as vinyl siding or conduits)
- Wood surfaces that are in direct contact with the ground or exposed to excessive ground moisture.
YOUR SURFACE MUST BE COMPLETELY DRY
Apply ADVANCED DECKOVER Coating only on a completely dry surface. After cleaning with water and appropriate cleaning products, allow a minimum of 24 hours of dry time.
- Do not apply in direct sunlight.
- If rain is predicted within 24 hours, don't apply
- If weather conditions are damp, allow for a longer dry time
- If you live in a high-moisture region, allow for a longer dry time
- Do not apply under foggy, high-moisture, or cool temperature conditions
- Ensure that the wood surface has adequate board spacing to allow for proper air circulation
PROJECT CHECKLIST
- Drop Cloth
- Painter's Tape
- Stiff Bristle Brush
- Plastic Watering Can
- Nylon/Polyester Brush
- Hose or Pressure Washer
- Wood or Concrete Cleaners (see video above)
- Protective Equipment (gloves, goggles, etc.)
- Concrete Surfaces: Paint Stripper to Remove Failing Coating (if necessary)
- ¼″ Nap Roller Cover (for Smooth & Textured ADVANCED DECKOVER Coatings)
- Advanced deckover™ extra textured roller cover (for extra textured advanced deckover coating)
- Wood Surfaces: Stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper to Remove Failing Coating (if necessary)
USAGE AND APPLICATION
DRY TIME
-4-6 hours before recoat. Dries to touch in 4 hours. -Wait 24-48 hours before light foot traffic. 72 hours to full cure. -Premature heavy traffic will cause coating failure. -Additional dry time may be needed in cooler temperatures and higher humidity.
WHERE TO USE
Recommended for properly prepared exterior weathered or cracked horizontal and vertical wood and composite surfaces such as Decks, Railings, Porches and Boat Docks. Also great for concrete surfaces such as Pool Decks, Patios and Sidewalks. Do not use on drivable surfaces such as garage floors and driveways.
USAGE
-Before Use
-2 COATS REQUIRED
-CLEAN-UP : Soap & Water
-Horizontal Spread RateE : Up to 75 Sq. Ft. per Gallon in 2 Coats
DISPOSAL
For disposal of empty containers and unused product, contact your household refuse collection service.
APPLICATION
-Use product when air and surface temperatures are between 50-90˚ F (10-32˚ C). -During application, avoid exposure of container to direct sunlight. Do not use if rain is expected within 24 hours. -Intermix multiple containers to ensure color uniformity. -Stir product occasionally throughout application. DO NOT THIN PRODUCT. -For nail holes and cracks up to 1/4", completely fill in with DeckOver coating using a nylon/polyester brush and allow to dry prior to rolling. Deep nail holes and cracks may require additional filling. -For edges, corners and in between wood boards, apply using a nylon/polyester brush. Use pressure while rolling and apply a generous, even coat using a 1/4-1/2" nap roller. For a smoother texture, use a brush or thinner nap roller (i.e. 1/4").
-For vertical surfaces such as railings, use a nylon/polyester brush or roller and apply two thin coats at a spread rate of 400 sq. Ft. Per gallon. -Airless spray is recommended for experienced applicators only; use a .027" - .035" tip with no mesh filter at 2400-3200psi. -When spraying vertical surfaces, apply a very thin coat (one pass only) and do not back brush/roll. -When spraying horizontal surfaces, follow the standard spread rate of 75 sq. ft. per gallon. -For optimum performance, film uniformity, leveling and to cover cracks, a second coat must be applied. -Maintain a wet edge when applying.
PREPARATION
-Use a stripper product to strip peeling coating.
-All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application.
-On new wood, use NO. 63 to remove mill glaze and open the pores of the wood. Rinse thoroughly and allow to dry before coating.
-Use an etcher product to clean and etch uncoated concrete or NO. 990 Concrete & Masonry Degreaser & Cleaner on sound coated surfaces prior to coating.
-On new wood, use NO. 63 to remove mill glaze and open the pores of the wood. Rinse thoroughly and allow to dry before coating.
-Concrete surfaces : avoid areas that are structurally weak or subject to hydrostatic pressure above 8 psi. Allow new surfaces to cure for 30 days.
-Wood surfaces: replace rotting or unstable boards and remove loose splinters. Remove mildew stains, dirt, oil and grease with a product such as behr premium® no. 63 all-in-one wood cleaner prior to application.
-Use a product such as BEHR PREMIUM NO. 64 Wood Stain & Finish Stripper (must be followed by NO. 63) to remove all loose wood fibers, peeling paint/stain or deteriorated coatings prior to application of DeckOver.
