Behr Premium® Solid Color Waterproofing Stain & Sealer

Tue Aug 13, 2024PaintsConstructionBehr Process Corp.

BEHR PREMIUM® SOLID COLOR WATERPROOFING STAIN & SEALER

BEHR PREMIUM® SOLID COLOR WATERPROOFING STAIN & SEALER

Our Most Advanced Formula Weathers It All

information

SIZES

- 8 oz
- 1 Quart
- 1 Gallon
- 5 Gallon

BRAND

Behr

PRODUCT TYPE

Paint

SPREAD RATE

- 1ST COAT
- 200-400 Sq. Ft
- 2ND COAT
- 400-800 Sq. Ft.

MUST PREP

Before Staining

SAFE

UV Protection

PROTECTION

Enhance your wood's natural patterns while providing increased protection from the elements with our #1 Rated Stain*. This 100% acrylic formula seals out the elements, and sun's harmful UV rays, for up to 10 yrs. on decks and up to 25 yrs. on fences & siding. It's available in 1,600 custom colors to help you create a look that's as beautiful as it is durable.

DISPOSAL

For disposal of unused paint products, please contact your household refuse collection service.

DRY TIME

1-2 hours before recoat. Wait 24-48 hours before light foot traffic. 72 hours for full cure.

2 THIN COATS

Recommended

CLEAN-UP

Soap & Water

WHERE TO USE

Recommended for properly prepared new to heavily weathered or cracking wood surfaces (0 to 15+ years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences, Wood Patio Furniture and Composites.

RESULT

For best results, a pad applicator is recommended over large areas.

COUSTOM COLORS

Available in 1600 custom colors

PROTECT

Rain Protection /Winter Protection

QUAILITY

A high quality pump sprayer with a variable tip or an airless sprayer with a .015 - .019″ tip may be used.

USE

Use 3/8” nap or longer when appropriate.

DETAIL

Use a nylon/polyester brush for areas requiring more accuracy.

PREPARATION

-Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood. BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood. -When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating. -On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

APPLICATION

-Must apply between 35-90˚F (1.7-32˚C). -Coating will resist rain after 4 hours. The wood surface must be completely dry before application. -No primer needed on most woods. However, Redwood, Cedar, Cypress and other "bleeding" woods contain water soluble extractives which may cause discoloration of white and pastel colors; therefore prime the above type woods with one coat of a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer. See label for additional instructions. Intermix multiple containers to ensure color uniformity.

-Stir product occasionally throughout application. -Use a 3/8” nap roller, nylon/polyester brush, pad applicator or airless sprayer. Airless spray is recommended for experienced applicators only; use a .015 - .019" tip. -If thinning is required, thin with water at a rate of no more than 1/2 pint per gallon. -Maintain a wet edge when applying. -Always back-brush and apply product end to end or to board lengths to prevent lap marks. Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily. -For optimum performance, coat all six sides of the wood.

DETAIL

PREPARATION REQUIREMENT

Before beginning your project, make sure to clean your surface. For best results, apply the second coat thinner than the first. Proper surface preparation is the key to attaining a beautiful appearance and achieving long lasting durability.

REQUIRED PRODUCT: BEHR PREMIUM^® ALL-IN-ONE WOOD CLEANER

-This product is required to properly prepare your surfaces for staining.
-Use on Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete. Make sure to use after application of BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper.

RECOMMENDED PRODUCT: BEHR PREMIUM^® WOOD STAIN FINISH STRIPPER

- This product is required to properly prepare your surfaces for staining.
-Use on Exterior latex, oil-based and 100% acrylic coatings on Wood Decks, Porches & Patios, Siding, Fences, Shakes and Shingles. After stripping the wood surface, BEHR PREMIUM® All-In-One Wood Cleaner NO. 63 is required to properly clean the surface and neutralize the stripping action.

WHY CHOOSE BEHR PREMIUM^® SOLID COLOR

UV PROTECTION

BEHR PREMIUM Stain is formulated to protect wood from drying out and cracking under direct sunlight, keeping your deck looking great summer after summer.

ALL-WEATHER PROTECTION

BEHR PREMIUM Stain can withstand snow, rain and ice and with our Low-temperature Protection paired with an advanced durable finish, you can be confident that it will weather any weather.

HIDE WOOD IMPERFECTIONS

BEHR PREMIUM Stain creates a Solid Color film that hides wood grain and minor imperfections to transform and beautify your outdoor living space.

T +1 714 5457101 F +1 714 2411002

Behr Process Corp.

https://www.behr.com

1801 E St Andrew Pl, Santa Ana, CA 92705, United States

Behr Premium® Solid Color Waterproofing Stain & Sealer