Ronacrete Ronacrete AR Glass Fibre Mesh
Ronacrete AR Glass Fibre Mesh
RONACRETE AR GLASS FIBRE MESH
Ronacrete AR Glass Fibre Mesh is a reinforcing mesh used to provide crack control in coatings, renders and screeds. The high zirconia content of the mesh ensures that mesh strength is unaffected by contact with cement and other alkaline materials.
INFORMATION
FEATURES AND BENEFITS
- Rot Proof
- Corrosion Proof
- HiNon Hazardous
- Easy to position
- High Tensile Strength
- Polymer Content Aids Net Stability
- High Zirconia Content Provides Alkali Resistance
- Binds Well With Cementitious Mortars & Coatings
BRAND
Ronacrete
PRODUCT TYPE
Mortars
TENSILE STRENGTH
> 1200 N/50mm warp & weft
COLLECTION
Ronacrete
PRODUCTION
Made In United Kingdom
DOWNLOADS
↓ Data Sheet
↓ Safety Datasheet
ZIRCONIA CONTENT
14.5—16.5%
SOFTENING TEMPERATURE
860 C
WEIGHT
160g/m2
ROLL DIMENSIONS
50m x 1m
SHELF LIFE AND STORAGE
Shelf life is unlimited. Store in dry conditions.
HEALTH AND SAFETY
Ronacrete AR Glass Fibre Mesh is non-hazardous, refer to safety data sheet.
POLYMER CONTENT
8-10%
INSTRUCTIONS FOR USE
Apply Ronacrete AR Glass Fibre Mesh to the prepared and primed substrate, ensuring that all strands of the mesh are thoroughly wetted by the priming slurry or self smoothing screed and that the mesh is not creased. For usage instructions with Monoprufe WP Elastic, see the product specific technical data sheet. Side and end laps should be 150mm
ISAT
0.003ml/m²/sec
COMPRESSIVE STRENGTH @ 28 DAYS
35N/mm²
SOFTENING TEMPERATURE
860 C
STRAIN AT BREAKING POINT
2.4%
MESH OPENING
5mm x 5mm
SPECIFIC GRAVITY
2.7
ELASTIC MODULUS
72-80.4GPa
