Osmo Oil Stain
Oil Stain Varnishes
OIL STAIN VARNISHES
Especially fast drying (when used with Oil Stain Hardener)
INFORMATION
BRAND
Osmo
PRODUCT TYPE
Varnishes
APPLICATIONS
No sanding necessary for spot repairs or future applications
FINISH
Microporous, breathable finish which does not crack, peel or flake
COLLECTION
Oil
FINISHES
Colours (Satin)
COATS
1-2 coats
RECOAT
One coat, when signs of wear become visible
RECOMMENDED USE
Interior wooden flooring and furniture
APPLICATION TOOLS
-Osmo Floor Brush -Hand Pad
-Double Blade Scraper or Osmo Microfibre Roller followed by white pad
SIZES
- 5ml
- 125ml
- 500ml*
- 1L2.5L
HIGH SOLID
Extremely durable and hardwearing
DRY TIME
4 hrs
CLEAN UP
Osmo Brush Cleaner
DOWNLOADS
↓ Safety Data
↓ Product Information
CARE
Osmo Wash and Care, or Spray-Mop
RECOAT
One coat, when signs of wear become visible
APPLICATION
No sanding necessary for future applications
DETAIL
- Very water and dirt resistant
- Specifically for commercial use
- Extremely durable and hardwearing
- Attractive colour tones, transparent or intensive
- Suitable for all woods including tropical wood species
- Saliva-resistant and sweatproof, suitable for children’s toys
- Microporous, breathable finish which does not crack, peel or flake
- No sanding necessary for spot repairs or future applications
- Resistant to common liquid spillages such as water, juice, tea, cola and wine
INSTRUCTIONS
SURFACE PREPARATION
-Wood surface must be clean, dry and frost-free (moisture content max. 18%). -Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
-Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). -Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum. -The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
METHOD OF APPLICATION
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.
After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.
CARE
REGULAR CLEANING
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads.
RECOATING
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
OCCASIONAL MAINTENANCE
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
COLORS
CLEAR FINISHES
-3501 White -3512 Silver Grey -3514 Graphite -3516 Jatoba -3518 Light Grey
-3519 Natural -3541 Havanna -3543 Cognac -3564 Tobacco -3590 Black
