
Osmo Polyx®-oil Original
POLYX®-OIL ORIGINAL
INFORMATION
BRAND
Osmo
PRODUCT TYPE
Varnishes
ADD
Highly resistant to common liquid spillages such as water, juice, tea, cola and wine
APPLICATION TOOLS
Osmo Flat Brush, Floor Brush, Hand Pad or Osmo Microfibre Roller
CHARACTER
Enhances the wood’s natural character
FINISHES
Clear and transparent colour finishes available
SUITABLE
Saliva-resistant and sweatproof, suitable for children’s toys (EN71.3)
FEATUER
Microporous, breathable finish which does not crack, peel, flake or blister
HIGH SOLID
Extremely durable and hardwearing
DRY TIME
8-10 hours
CLEAN UP
Osmo Brush Cleaner
DOWNLOADS
↓ Safety Data
↓ Product Information
CARE
Osmo Wash and Care, or Spray-Mop.
RECOAT
One coat, when signs of wear become visible
APPLICATION
No sanding necessary for future applications
SIZES
5ml
125ml
375ml
750ml
2.5L
10L
CLEAR FINISHES
- Glossy
- Satin
- Matt
- Semi-Matt
RECOMMENDED USE
Interior wooden floors and furniture
SAFE
Very water, dirt and abrasion resistant
INSTRUCTIONS
SURFACE PREPARATION
-Wood surface must be clean, dry and frost-free (moisture content max. 18%). -Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
-Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). -Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum. -The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
METHOD OF APPLICATION
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.
After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.
CARE
REGULAR CLEANING
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads.
RECOATING
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
OCCASIONAL MAINTENANCE
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
COLORS
CLEAR FINISHES
VIDEOS
