Perma Tone Spatula (Rx) Glazes & Paints
SPATULA (RX) GLAZES & PAINTS
SPATULA (RX) GLAZES & PAINTS
All our glazes and paints are water based, environmentally safe and vapor permeable. RIFLEXI A decorative pearlescent metallic glaze for a wide number of surfaces, and will produce stunning effects when used in combination with PermaTone Textures.
INFORMATION
PRODUCT TYPE
Paint
COLORS
9 standard colors
PROPERTIES
Drying Time
- Cure: 72 hrs @ 70°F, 50% RH
- Initial Set: 30 min @70°F, 50% RH
PACKAGING
1 gallon pail: 7.4 lbs. net, 8.1 lbs. gross; 5 gallon pail: 39 lbs. net, 41.8 lbs. gross
BENEFITS
Water based; integral color; environmentally safe; vapor permeable.
APPROXIMATE COVERAGE
1500-2000 ft² per 5 gallon bucket.
PROPERTIES
Initial set in 30 minutes, cure in 72 hours, at 70°F and 50% RH.
EQUIPMENT
Stainless steel trowel with runded corners and beveled edges; spatula; knockdown blade
SHELF LIFE
Approximately six months if stored properly.
MATERIAL PREPARATION
Mix RIFLEXI manually or with a low rpm mixer.
RECOMMENDED USE
The luminous properties of Riflexi make it a stunning choice for elegant and luxurious wall spaces, enriching surfaces with its dramatic and unique metallic appearance. While Riflexi can be applied to most any surface, it is most effective when combined with other PermaTone products.
SUGGESTED APPLICATION
-(Over smooth surfaces) Using a stainless steel trowel or spatula, apply the RIFLEXI over the surface as Quarztsilco, Palladio, Marmolino, Tevere or any other Permatone finish using airless or small strokes with irregular pattern. Avoid any material build up. -(Pattern with sponge or cloth) Apply the RIFLEXI evenly with a sponge or cloth creating the desired pattern and texture. Clean the sponge or cloth regularly to avoid wet material build up on the wall. Create your own designs by experimenting with different tools and techniques.
COVERAGE
Each gallon provides approximately 300 ft2 to 500 ft2 of coverage depending on the technique of application. Variances in substrate and application technique will affect coverage.
SURFACE PREPARATION
Surfaces must be clean and dry. When applied over PermaTone textures, consult the application instructions for such textures for drying and curing times..
APPLICATION INSTRUCTIONS
Using a stainless steel trowel, apply Riflexi to the surface using small strokes and an irregular pattern. Avoid material buildup. Thickness should not exceed 5 mils..
DOWNLOADS
↓ Information Sheet
↓ Product Sheet
↓ Permatone Interior Finish Warranty
↓ Cleaning, Maintenance & Repair Cerami
↓ Interior Finish Coatings Testing Summary
↓ Specs Light Damascus – Chiffon & Pintufondo
↓ Chiffon Interior Textured Finishes Voc Statement
↓ Cleaning, Maintenance & Repair – Quartzsilco
↓ Specs: Light Damascus – Quartzsilco & Pintufondo
↓ Cleaning, Maintenance & Repair – Venetian Plasters
↓ Quartzsilco Interior Textured Finishes Voc Statement
↓ Interior Finish Coatings Testing Summary – Quartzsilco, Quartzmural
↓ Manufacturer’s Long Form Specifications Interior Finish Coatings Pf-405
↓ Interior Finish Coatings Testing Summary - Quartzsilco, Quartzmural, Chiffon
REDUCTION
For application other than spatula, RIFLEXI can be diluted with water, not to exceed 10% dilution by volume.
EQUIPMENT
Stainless steel trowel with rounded corners and beveled edges. Texture glove, spatula, plastic trowel, trim guard, spray equipment, cloth, brush, or any other tool useful in producing desired finish
STORAGE
Store RIFLEXI in its original containers at temperatures not less than 40°F (4°c) or greater than 110°F (43°C). Store in covered space, out of direct sunlight. Do not stack pails more than three high.
MAINTENANCE
Surface may be cleaned of minor stains with a damp cotton cloth.
WARRANTY
10 years material warranty against delamination, color fading and mildew growth.
LIMITATIONS
-For use on interior and exterior wall surfaces only. -Patching limitations standard to applied coatings. -This product requires skilled application. -Surface air and substrate temperatures shall be 60°F to 85°F during application and for a period of 24 hoursthereafter. -Riflexi is not compatible with solvent base products or cleaners. -Use in well ventilated areas. -Protect all adjacent surfaces (door frames, windows, etc.) adequately. -Do not water downmaterial. -Do not apply over quicksetjoint compound. -Always wear appropriate eye andskin protection when using this product. -Harmful if swallowed. -Avoid constant moisture in the wall cavity behind the coating.
