Kilz Kilz® Original Low Odor Interior Primer
KILZ® ORIGINAL LOW ODOR INTERIOR PRIMER
KILZ® ORIGINAL LOW ODOR INTERIOR PRIMER
KILZ® ORIGINAL LOW ODOR is an interior oil-based sealer, adhesion promoter and stain blocker with less odor than typical oil-based primers. It also features fast odor dissipation technology which means no lingering odor†.
Ideal for use in offices, schools, dining areas, apartments and other areas which are sensitive to solvent odors or high odor levels. Use KILZ ORIGINAL LOW ODOR Primer to block stains including water, tannin and smoke from tobacco and fire. Not recommended for floors
INFORMATION
USE
- Interior
- Exterior
MILS
- Mils Wet : 5.3
- Mils Dry : 3
BRAND
Kilz
PRODUCT TYPE
Paint
VISCOSITY
95 - 105 KU
FINISH @ 85°
< 10
SURFACE
-Roller - Smooth Surface 3/8" - 1/2" nap -Roller -Smooth Surface 3/8" - 1/2" nap
WEIGHT SOLIDS
79.1% (+/-) 2%
FLASHPOINT
102°F (38.9°C)
SPRAY FILTER
60 mesh
VOLUME SOLIDS
55.9% (+/-) 2%
FEATURES
INT/EXT
Int/Ext
BASE
Oil
APPLICATION TEMP
-Min Application Temp : 35°F (10°C) -Max Application Tem 90°F (32°C)
SURFACE
-Roller - Smooth Surface 3/8" - 1/2" nap -Roller -Porous Surface 1/2" - 3/4" nap
BRUSH
Nylon / Poly
SPRAY TIP
.015" - .019"
SPRAY PRESSURE
2,500 - 3,200
DRY TO TOUCH
30 min
COLOR
White
VOC
331 g/L
DRY TO RECOAT
1 hour
MAX TINT
2 oz
COVERAGE
-Coverage High : 400 sq. ft.
- Coverage Low : 300 sq. ft.
COLLECTION
Kilz®
PRODUCTION
Made in USA
details
DRY TIME AT 77°F (25°C), 50% RH
- Recoat or topcoat after 1 hour
- Dries to the touch in 30 minutes
CLEAN-UP & DISPOSAL
-Clean equipment and paint spatters with mineral spirits or acetone. Immediately after use, dispose of soiled rags and waste in a closed, water-filled container. -Do not dispose of this product down a drain. Please consider donating any unused product. -If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection servie.
SURFACE PREPARATION
-All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances. -If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry. -Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.* -Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.*
-Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.Note: KILZ PREMIUM and KILZ 2® Primers are recommended for mildew-prone surfaces -Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL LOW ODOR Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ ORIGINAL LOW ODOR Primer.
SURFACE PREPARATION†
-All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances. -If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry. -Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.* -Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.
-Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming Note: KILZ PREMIUM and KILZ 2® Primers are recommended for mildew-prone surfaces. -Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL LOW ODOR Primer may be used on clean, dry, aged masonry surfaces -New masonry must be allowed to cure (dry) at least 30 days before applying KILZ ORIGINAL LOW ODOR Primer
APPLICATIONS
-Eye protection is recommended. Do not thin. Stir thoroughly before and occasionally during use. Apply using a brush, roller or sprayer. Any slight odor that is detected during application will diminish quickly. -Use product when painting surface and air temperatures are between 35°F (2°C) and 90°F (32°C). -Brush – High quality Nylon/Polyester -Roller – High quality 3/8-1/2 " nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces. -Airless spray – .015-.019 tip / 60 mesh filter
-Prime the entire surface to ensure a uniform appearance of the topcoat -Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating. -Tinting: Up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than topcoat is recommended. -Coverage: 300-400 sq. ft. (27.87-37 m2) per gallon depending on application method and surface porosity. -Dry Time @ 77°F (25°C) / 50% RH: Touch in 30 minutes, Paint in 1 hour.
LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable.
This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
