Kilz® Original Interior | Exterior Primer
KILZ® ORIGINAL INTERIOR | EXTERIOR PRIMER
KILZ® ORIGINAL INTERIOR | EXTERIOR PRIMER
KILZ® ORIGINAL has been a trusted brand for over 40 years!
This interior and exterior primer is specially formulated to be a sound undercoat for paint and will help enhance the topcoat’s performance.
It has excellent adhesion to both interior and exterior surfaces including masonry, metal and excellent penetration for bare wood.
KILZ® ORIGINAL INTERIOR/EXTERIOR is a fast drying oil-based sealer that blocks most severe stains including tannin bleed, graffiti, smoke, fire and water stains as well as sealing pet, smoke and food odors.
Use on interior and exterior surfaces including wood, drywall, plaster, brick, masonry, stucco, interior siding and paneling, metal and properly prepared glossy surfaces†. Not recommended for floors.
INFORMATION
APPLICATION TEMP
- Min : 35°F (2°C)
- Max : 90°F (32°C)
BRAND
Kilz
PRODUCT TYPE
Paint
ROLLER
- Smooth Surface : 3/8"-1/2" nap
- Porous Surface : 1/2"-3/4" nap
PRODUCTION
Made in USA
BASE
Oil-Based
LOW VOC | REGULAR VOC
- Mils Wet : 5.3
- Mils Wet : 3.0 | 2.3
DRY TO RECOAT - LOW VOC | REGULAR VOC
2 hour | 2-3 hours
COLOR
White
COVERAGE - LOW
300 sq. ft.
DRY TO TOUCH - LOW VOC | REGULAR VOC
60-90 min | 30 min
LOW VOC | REGULAR VOC 1
- Mils Wet : 4.0
- Mils Wet : 2.3 | 1
COVERAGE HIGH
400 sq. ft.
FINISH @ 85°
< 10
VOLUME SOLIDS
56.5% (+/- 2%) for Low VOCversion / 43.3% (+/-2%) for Regular VOC version
MAX TINT
2 oz
LOW VOC
350 g/l
WEIGHT SOLIDS
75% (+/-2%) for Low VOC version / 64.5% (+/- 2%) for Regular VOC version
REGULAR VOC
450 g/l
BRUSH
Nylon / Polyester Blend
FLASHPOINT
74°F (23.3°C) for Low VOC version / 71°F (21.7°C) for Regular VOC versio
FEATURES
details
CLEAN-UP & DISPOSAL
-Clean equipment and paint spatters with mineral spirits or acetone. Immediately after use, dispose of soiled rags and waste in a closed, water-filled container. -Do not dispose of this product down a drain. Please consider donating any unused product. -If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.
DRY TIME @ 77°F (25°C) / 50% RH
- Paint in 1 hour.
- Touch in 30 minutes.
SURFACE PREPARATION†
The following steps are recommended for product performance.
-Peeling or Checked Paint : Scrape off loose paint and sand to a smooth surface.
-Fire Restoration : It is critical to clean smoke damaged surfaces thoroughly before priming.
-†Glossy Surfaces : For maximum adhesion, scuff sand the surface thoroughly before priming.
-If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry
-Mold or Mildew Covered Surfaces : Wash the area with a mildew remover, rinse with water and allow to dry before priming.
-All surfaces must be clean, free of dust, chalk, oil, mold and mildew, loose peeling paint, rust and all other foreign substances.
-Masonry, Brick, Stucco and Plaster : KILZ ORIGINAL INTERIOR/EXTERIOR Primer may be used on clean, dry, aged masonry surfaces that have cured (dried) at least 90 days. If masonry has cured less than 90 days, use KILZ PREMIUM or KILZ 2® Primers.
APPLICATION
-Brush – High quality Nylon/Polyester
-Apply using a brush, roller or sprayer.
-Airless spray – .015-.021 tip / 60 mesh filter
-Prime entire surface to ensure a uniform appearance of the topcoat.
-Use product when painting surface and air temperatures are between 35°F (2°C) and 90°F (32°C).
-Coverage : 300-400 sq. ft. (28-37 m2) per gallon depending on application method and surface porosity.
-Tinting : Up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than topcoat is recommended.
-Roller – High quality 3/8-1/2” nap on smooth surfaces or 1/2-3/4” nap on semi-rough or porous surfaces.
-Eye protection is recommended. Do not thin. Stir thoroughly before and occasionally during use.
-Stainblocking : After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
