
Crosswater Optix 10 180° Hinged With Inline Panel
OPTIX 10 180° HINGED WITH INLINE PANEL
information
COLLECTION
Optix
WEIGHT
39kg
FINISH
Brushed Brass
CROSSWATER CLEAR
As standard
CARE AND CLEANING
Do not use solvents or abrasive material or chemicals to clean Only clean using soapy water and soft cloth, rinse the bath screen. thoroughly afterwards.
ADJUSTMENT
900-915
GUARANTEE
Lifetime Guarantee
YEAR OF PRODUCTION
2022
PRODUCTION
Made in United Kingdom
PRE-INSTALLATION
Ensure the bath rim is as flat as possible, this will assist in a smooth and water tight moving door operation.
PRODUCT NOTE
-180 Hinge rotation -Hinged panel width 540 -We recommend the bath ledge is flat and a minimum of 70mm width
BARCODE
5056553409284
AVAILABLE FINISHES
5
INSTALLATION - ADVISE AND SAFETY
-The installation instructions are based on typical use and conditions. -All doors are designed to open outwards only. -Ensure that the product can be fixed to a solid masonry/brick wall or suitable timber stud work grade C16-C24 in the area behind the wall profile and wall brackets. -These instructions have been prepared for your guidance, you must exercise due care at all times.
-For Health and Safety 2 people must carry out the installation of this bath screen. -Handle glass with care. Although the glass supplied is tough-ened safety glass(EN12150), impacts can damage both the glass and the frame. Warning! -Please check for any hidden pipes or cables before drilling holes in the wall. When using power tools always follow the manufacturers user instructions. -If the Framework is sealed to the bath on the inside, any water that may get into the framework will not be able to drain back into the tray, this may cause the bath screen to leak. -Leave the silicone sealant to dry for 24 hours before using the bath screen.
FINISHES
